Home/Electronic Components/Relays/Seeed Grove Relay

Seeed Grove Relay

SKU:

32-00018301

Part Number: 103020005

CompanySeeed Studio Part Number103020005

Out of Stock

€3⁶⁰

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

The Grove-Relay module is a digital normally-open switch that can handle the current up to 5A at 250VAC for long periods of time. When the relay is switched on, the LED will light up and the relay will allow current to flow. The peak voltage capability is 250V at 10A. It is widely used in remote control, telemetry, communication, automatic control, mechatronics, power electronics and other fields.

The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards.

With the help of the Grove System, engineers and makers can easily avoid jumper-wires problems. Seeed Studio has developed more than 300 Grove modules covering a wide range of applications that can fulfill a variety of needs.

Please exercise great care when working with mains voltages - if in doubt contact a professional such as a licensed electrician for help.

Features

Digital-Switch: It has the advantages of accurate measurement, simple setting, multiple protection functions and fast speed.
Maximum load of a normally open interface: AC 5v@250V, DC 5v@30V.
Easy to connect: The easy connection is just with jumper wires, no soldering tools are required.
Change the level state: High-level or low-level trigger can be set by wire jumper.
Friendly LED reminders: When the relay works, the power prompt light will light up.

Specification

Operate voltage	3.3V-5V
Input current	100mA
Rated load	5A@250VAC 5A@30VDC
Contact resistance	50mΩ @6VDC 1A
Insulation resistance	100MΩ 10ms Max.
Operate time	10ms Max.
Release time	5ms Max.
Input interface	Digital
Dimensions	42mm x24mm x18.5mm
Weight	G.W 19g
Battery	Exclude