Αρχική Σελίδα/Ρομποτική/Αναπτυξιακά Εργαλεία/ESP32 & ESP8266/Seeed Studio XIAO ESP32-C3

Seeed Studio XIAO ESP32-C3

Κωδικός:

32-00018378

Part Number: 113991054

ΚατασκευαστήςSeeed Studio Part Number113991054

Διαθέσιμο

Αποστολή σε 24 ώρες

€9⁹⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.

Key features

Flexible MCU Board: Incorporate the ESP32-C3 32-bit RISC-V chip, operating up to 160MHz, mounted multiple development ports, supported by Arduino/CircuitPython
Outstanding RF Performance: Implement complete Wi-Fi functions and Bluetooth Low Energy, while supporting communication over 100m with a U.FL antenna
Elaborate Power Design: Provide 4 working modes as low as 44 μA in deep sleep mode, while supporting lithium battery charge management
Thumb-sized Design: 21×17.8mm, Seeed Studio XIAO series classic form factor and elegant productization of single-sided components mounting, suitable for wearable devices
Perfect for Production: Breadboard-friendly & SMD design, no components on the back

Hardware layout

Technical data

Processor	ESP32-C3 SoC RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz
Wireless	Complete 2.4GHz Wi-Fi subsystem Bluetooth 5.0, Bluetooth mesh
On-chip Memory	400KB SRAM & 4MB Flash
Interface	1× UART, 1× IIC, 1× SPI,11× GPIO(PWM), 4× ADC 1× Reset button, 1× Boot button
Dimensions	21×17.8mm
Power	Circuit operating voltage: 3.3V@200mA Charging current: 350mA/100mA Input voltage (VIN): 5V
Deep Sleep Power Consumption	Deep Sleep Model: >44μA
Wi-Fi Enabled Power Consumption	Active Model: <75mA Modem-sleep Model: <25mA Light-sleep Model: <4mA
BLE Enabled Power Consumption	Modem-sleep Model: <27mA Light-sleep Model: <10mA
Working Temperature	-40°C – 85°C