>>> Θέσεις εργασίας <<<

 
+302118004320
Greek (GR)
0Στο Καλαθι

Waveshare ESP32-S3 Touch IPS LCD – 7" 800×480

31-00027078
ESP32-S3-Touch-LCD-7
ΚατασκευαστήςWaveshare Part NumberESP32-S3-Touch-LCD-7
Κατόπιν παραγγελίας
Διαθέσιμο σε 45-60 ημέρες
€4860
Waveshare
+ −
Αγαπημένα
Κάνε μια ερώτηση
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

This is a microcontroller development board featuring 2.4GHz Wi-Fi and Bluetooth BLE 5 support. It integrates high-capacity Flash and PSRAM, and comes with a 7-inch LCD screen capable of smoothly running GUI applications such as LVGL. With a variety of peripheral interfaces, it is well-suited for rapid development of HMI and other applications based on the ESP32-S3 platform.

Key features
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 16MB Flash
  • Onboard 7inch LCD display, 800×480 resolution, 65K color
  • Supports 5-point capacitive touch control via I2C interface, with interrupt support (for touch version only)
  • Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
  • Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios



Hardware layout
  1. ESP32-S3N16R8
    The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash
  2. 7inch display panel connector
  3. Touch panel connector
  4. TF card slot
  5. USB Type-C port
  6. UART1 Port
    USB TO UART Type-C port
  7. UART2 connector
    UART1 and UART2 are the same UART, selected by switch
  8. Sensor header
  9. CAN header
  10. I2C header
  11. RS485 header
  12. 3.7V single lithium battery PH2.0 header
  13. CAN terminal resistor selection
  14. RS485 terminal resistor selection
  15. UART selection
    select UART1 or UART2
  16. BOOT button
    Press and hold while powering on for program burning
  17. RESET button
  18. I2C level selection
    3.3V / 5V
  19. DONE
    Lithium battery charging completed indicator
  20. CHG
    Lithium battery charging indicator
  21. PWR
    Power supply indicator
Supports multiple peripherals

Supports the expansion of multiple peripherals via Sensor, CAN, RS485, and I2C interfaces.


IPS display panel

Excellent display performance, 170° viewing angle.




Package contents
  1. ESP32-S3-Touch-LCD-7 ×1
  2. HY2.0 2P to 2PIN male cable 10cm ×2
  3. HY2.0 3P to 3PIN male cable 10cm ×1
  4. HY2.0 4P to 4PIN male cable 10cm ×2
  5. Screws pack ×1


Κατασκευαστής
Waveshare
Part Number
ESP32-S3-Touch-LCD-7
Εγγύηση
12 Μήνες Εγγύηση Κατασκευαστή
Καθ. Βάρος
0.291kg
Board Specifications
MCU/SoC
ESP32-S3
Processor
Xtensa dual-core 32-bit LX7
Clock Speed
240 MHz
RAM
512 kB SRAM & 8 MB PSRAM
ROM
384 kB
Flash Memory
16 MB
Bluetooth
Bluetooth 5
Wi-Fi
Wi-Fi 4 – 802.11b/g/n – 2.4 GHz
Extra Features
  • Battery connector
  • CAN bus
  • Card slot
  • Display
  • RS485
Display Specifications
Ποιότητα Χρωμάτων
65Κ
Μέγεθος Οθόνης
7 "
Ανάλυση
800×480
Αναλογία Οθόνης
  • 5:3
Οθόνη Aφής
Capacitive
Βρες Παρόμοια
  • Προτείνουμε επίσης