grobotronics
2118004320

CATALOG

Page 1 / 9 - 145 Products
50%
TMP006 Breakout
SparkFun Infrared Temperature Breakout - TMP006
€20.39 €10.20
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SparkFun Electronics, SEN-11859, 0.0042kg, USA, Temperature

This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it.

In Stock
Ships in 24 Hours
+ −
50%
Copernicus II DIP Module
Copernicus II DIP Module
€109.30 €54.65
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SparkFun Electronics, GPS-11858, 0.02kg, USA

The Copernicus II is a great GPS module from Trimble, but the SMD module prohibits immediate gratification.

In Stock
Ships in 24 Hours
+ −
50%
Tinkerkit DMX Receiver - Mos
Tinkerkit DMX Receiver - Mos
€54.99 €27.50
12 Months Manufacturer Warranty, Arduino, T020090, 0.05kg, Italy

The DMX MosFet Receiver is a DMX module that mounts four mosfets; they can be individually controlled using a DMX master like TinkerKit!’s DMX Master Shield.

In Stock
Ships in 24 Hours
+ −
50%
LilyPad Power Supply
LilyPad Power Supply
€20.39 €10.20
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SparkFun Electronics, DEV-11259, 0.0053kg, USA

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible.

In Stock
Ships in 24 Hours
+ −
30%
NinjaFlex FLEX 85A Filament - 1.75mm Fire Red 0.5kg
NinjaFlex FLEX 85A Filament - 1.75mm Fire Red 0.5kg
€41.90 €29.33
Red, 1.75mm, FLEX (TPU,TPC,TPE), 225-235°C, 0.500kg, ≥ 95%, ±0,05mm, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, NinjaTek, 3DNF0317505, 0.7kg, USA
NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in...
In Stock
Ships in 24 Hours
+ −
60%
Wanhao Duplicator i3 Mount for extruder
Wanhao Duplicator i3 Mount for extruder
€15.90 €6.36
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, WANHAO, 305064, 0.082kg, China
In Stock
Ships in 24 Hours
+ −
50%
Timing Belt - XL Width 6mm (Per Meter)
Timing Belt - XL Width 6mm (Per Meter)
€1.80 €0.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.015kg, China, XL, Neoprene & Fiberglass Cords
These are resistant XL sized timing belts that fit snug inside of the Actobotics timing pulleys.
In Stock
Ships in 24 Hours
+ −
50%
Timing Belt - GT2 (Per Meter)
Timing Belt - GT3 (Per Meter)
€3.90 €1.95
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.015kg, China, GT3, Neoprene & Fiberglass Cords
These are resistant GT3 sized timing belts that fit with our timing pulleys.
In Stock
Ships in 24 Hours
+ −
50%
Aluminum GT3 Timing Pulley - 20 Tooth - 5mm Bore
Aluminum GT3 Timing Pulley - 20 Tooth - 5mm Bore
€2.60 €1.30
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.012kg, China, GT3, 20T, Inner Diameter: 5mm, Aluminum
For precise motion control, GT3 belts and pulleys offer excellent precision at a great price.
In Stock
Ships in 24 Hours
+ −
30%
EasyPrint PETG Filament - 1.75mm - 1 kg - Silver
EasyPrint PETG Filament - 1.75mm - 1kg - Silver
€29.90 €20.93
Silver, 1.75mm, PET (PETG,PETT), 210-235°C, 1kg, ≥ 95%, ±0.02mm, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, PRIMACREATOR, PC-EPETG-175-1000-SSI, 1.359kg, EU
EasyPrint PETG  is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of...
In Stock
Ships in 24 Hours
+ −
30%
EasyPrint PETG Filament - 1.75mm - 1 kg - Transparent Blue
EasyPrint PETG Filament - 1.75mm - 1kg - Transparent Blue
€29.90 €20.93
Blue, 1.75mm, PET (PETG,PETT), 210-235°C, 1kg, ≥ 95%, ±0.02mm, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, PRIMACREATOR, PC-EPETG-175-1000-TBL, 1.359kg, EU
EasyPrint PETG  is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of...
Upon order
Delivery on 7 - 14 Days
+ −
30%
EasyPrint PETG Filament - 1.75mm - 1 kg - Transparent Green
EasyPrint PETG Filament - 1.75mm - 1kg - Transparent Green
€29.90 €20.93
Green, 1.75mm, PET (PETG,PETT), 210-235°C, 1kg, ≥ 95%, ±0.02mm, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, PRIMACREATOR, PC-EPETG-175-1000-TGN, 1.359kg, EU
EasyPrint PETG  is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of...
In Stock
Ships in 24 Hours
+ −
30%
EasyPrint PETG Filament - 1.75mm - 1kg - Transparent Red (Rose)
EasyPrint PETG Filament - 1.75mm - 1kg - Transparent Red (Rose)
€29.90 €20.93
Red, 1.75mm, PET (PETG,PETT), 210-235°C, 1kg, ≥ 95%, ±0.02mm, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, PRIMACREATOR, PC-EPETG-175-1000-TRD, 1.359kg, EU
EasyPrint PETG  is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of...
In Stock
Ships in 24 Hours
+ −
40%
Creality 3D Extruder Base
Creality 3D Extruder Base
€4.90 €2.94
Extruder Feed, CR10 (MK8 Hotend), Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, CREALITY, 0.008kg, China
Extruder Base for Creality 3D.
In Stock
Ships in 24 Hours
+ −
50%
TL-Smoother v1.0 Expansion Board For 3D Printer Driver
TL-Smoother v1.0 Expansion Board For 3D Printer Driver
€3.20 €1.60
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, BIQU, SMOOTHER v1.0, 0.008kg, China
The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so...
In Stock
Ships in 24 Hours
+ −
50%
Silicone Heatbed 200mm - 220V 150W
Silicone Heatbed 200mm - 220V 150W
€19.90 €9.95
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.2kg, China
This is 150 Watt, 220V, 200mm diameter silicone heater with integrated temperature feedback thermistor, for your delta 3D printer heated bed. This heater...
In Stock
Ships in 24 Hours
+ −
50%
Capacitor Ceramic 1000V 18pF
Capacitor Ceramic 1000V 18pF
€0.10 €0.0500
Ceramic, THT, 18pF, 1000Volt, Tolerance: ±10%, -25...85°C, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SR PASSIVES, CCH-18P/1000V, 0.001kg, China
In Stock
Ships in 24 Hours

Minimum quantity for "Capacitor Ceramic 1000V 18pF" is 10.

30%
PrimaCreator Value Water Washable UV Resin - 1lt - Transparent Green
PrimaCreator Value Water Washable UV Resin - 1lt - Transparent Green
€49.90 €34.93
Green, Water Washable, 1000ml, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, PRIMACREATOR, PV-Resin-B405-1000-TG, 1.218kg, EU
When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice! The new   water...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

No products with the selected options in stock
1 2 3 4 5 6 7 8
2 - 9