>>> Θέσεις εργασίας <<<

 
+302118004320
English (GB)
0Cart

Waveshare RP2350 IPS LCD – 0.96" 160×80

31-00028822
RP2350-LCD-0.96
CompanyWaveshare Part NumberRP2350-LCD-0.96
Upon Order
Available in 45-60 days
€1240
Waveshare
+ −
Add to wish list
Ask a question
Gropbotronics Store Availability
Availability in Retail Store
Payments & Shipping

This is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2350A microcontroller chip, the same as the one on Raspberry Pi Pico 2. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly.

In addition, there's also an onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip.


Available options


Key features
  • RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
  • 520KB of SRAM, and 4MB of on-board Flash memory
  • USB-C connector, keeps it up to date, easier to use
  • 0.96inch 160×80 pixels 65K colorful IPS LCD display
  • Lithium battery recharge/discharge header, suitable for mobile devices
  • Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
  • Castellated module allows soldering directly to carrier boards
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • 26× multi-function GPIO pins
  • 2× SPI, 2× I2C, 2× UART, 4× 12-bit ADC, 16× controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 12× Programmable I/O (PIO) state machines for custom peripheral support
Hardware layout
  1. USB Type-C connector
    for program downloading, supports USB1.1 hosts and slave devices
  2. BOOT button
  3. RESET button
  4. 0.96inch IPS LCD display
    160×80 pixels, 65K colorful
  5. Battery header
    MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
  6. MP28164
    high efficiency DC-DC buck-boost chip
  7. ETA6096
    high efficiency Lithium battery recharge manager
  8. RP2350A
    Dual-core and dual-architecture design, up to 150 MHz operating frequency
  9. P25Q32SH-UXH-IR
    4MB NOR-Flash
  10. DEBUG points
  11. Pinout
    compatible with Raspberry Pi Pico 2



Package contents


  • GRobotronics SKU: 31-00029438
    • RP2350-LCD-0.96 with pre-soldered header ×1


Company
Waveshare
Part Number
RP2350-LCD-0.96
Warranty
12 Month Manufacturer Warranty
G. Weight
0.005kg
Board Specifications
MCU/SoC
RP2350
Processor
Dual ARM Cortex-M33 or Hazard3
Clock Speed
150 MHz
RAM
520 kB SRAM
ROM
32 kB
Flash Memory
4 MB
Bluetooth
No Bluetooth
Wi-Fi
No Wi-Fi
Extra Features
  • Battery connector
  • Display
Display Specifications
Color Quality
65Κ
Display Size
0.96 "
Resolution
160×80
Aspect Ratio
  • 2:1
Touchscreen
Without
Find similar
  • We suggest also
  • Recently Viewed