Gravity Analog Water Pressure Sensor

SKU:

25-00016612

Part Number: SEN0257

CompanyDFRobot Part NumberSEN0257

In Stock

Ships in 24 Hours

€22⁹⁰

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

This is a water pressure sensor adopts DFRobot Gravity 3-pin interface. It supports standard 5V voltage input and 0.5~4.5V linear voltage output. It is compatible with multiple Arduino controllers. Coordinate with a DFRobot Gravity IO Expansion Shield, the water pressure sensor can be plugged into an Arduino board, wiring-free. Put it with Solenoid Valve, Water Turbine Generator and other sensors, you can build a smart water control system. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.

Briefly speaking, this water pressure sensor is a stethoscope to a water pipe. It will help you to diagnose whether there is water, how strong the water pressure is. It can be widely applied to smart home control systems (SCS), Internet of Things (IoT) and device detections.

THE PACKAGE INCLUDES

1x Gravity: Analog Water Pressure Sensor
1x G1/2 to G1/4 Connector (mounted)

Connection Diagram

Medium: Liquid/gas without corrosion
Wiring: Gravity-3Pin (Signal-VCC-GND)
Pressure Measurement Range: 0~1.6 Mpa
Input Voltage: +5 VDC
Output Voltage: 0.5~4.5 V
Measurement Accuracy: 0.5%~1%FS (0.5%, 0~55°C)
Threadably: G1/4
Adapter: G1/2 to G1/4
Waterproof level: IP68
Operating Temperature: -20~85°C
Response Time: <2.0 ms
Quiescent Current: 2.8 mA
Normal Operating Pressure: ≤2.0 Mpa
Damaged Pressure: ≥3.0Mpa
Service Life: 10.000.000 times

Pin Out

Support water pressure detection of living environmental water systems, such as houses, gardens and farms.
Support water pressure detection of outdoor environment, such as rivers, lakes and sea.