ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Kitronik Thermometer Project Kit

από KITRONIK
The Thermometer Kit uses a thermistor to measure indoor and outdoor temperatures. The temperature is shown on an LED scale, controlled by a PIC microcontroller.
83-00002110
Ογκομετρικό βάρος: 0kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: KITRONIK
Part Number: KITRONIK-2110
Χώρα Προέλευσης: Ηνωμένο Βασίλειο
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
7.90
Χωρίς ΦΠΑ 6.37
+

ΠΕΡΙΓΡΑΦΗ

The Thermometer Kit uses a thermistor to measure indoor and outdoor temperatures. The temperature is shown on an LED scale, controlled by a PIC microcontroller.

This kit uses a thermistor to measure the temperature which is then displayed on an LED scale. A PIC micro-controller, pre-programmed with special software, is used to process the output of the thermistor and light the relevant LEDs.

The thermometer has two temperature ranges. One designed for indoor use and the other for outdoor use (selected by a wire link). The temperature is displayed every 10 seconds or can be displayed on demand by adding either a normally open / normally closed push button switch.

Note: This kit requires soldering.

Features:

  • Thermometer Project Kit.
  • Uses a thermistor to measure indoor and outdoor temperatures.
  • The temperature is shown on an LED scale, controlled by a PIC microcontroller.
  • The temperature is displayed every 10 seconds.

Contents:

  • 1 x PP3 Clip Lead
  • 1 x 3AA Battery Cage With Clip
  • 8 x 5mm Red LED
  • 4 x 33Ω Resistors
  • 1 x 2.2KΩ Resistor
  • 1 x 2.2kΩ Thermistor
  • 1 x 8 Pin IC Holder
  • 1 x PIC 12F675 Pre-Programmed With Thermometer Code.
  • 1 x Thermometer PCB

Dimensions:

  • PCB Length: 124mm.
  • PCB Width: 19mm.

Requires:

Resources:

 

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
KITRONIK
Part Number:
KITRONIK-2110
Μικτό Βάρος:
0.001kg
Χώρα Προέλευσης:
Ηνωμένο Βασίλειο