grobotronics
2118004320

CATALOG

Servo Accessories

Φίλτρα
Φίλτρα

Servo / Motors

FILTERS

Servo Standar
Manufacturer
Availability
Page 1 / 2 - 34 Products
Metal Flat Key Shaft Flange Plate - For Bus Servo
Metal Flat Key Shaft Flange Plate - For Bus Servo
€3.60
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, WAVESHARE, Metal Flat Key Shaft Flange Plate-A, 0.023kg
Metal Flat Key Shaft Flange Plate, Suitable For Using With Serial Bus Servo, Compatible With Various Transmission Parts
In Stock
Ships in 24 Hours
+ −
Feetech TTLinker Mini for SCS Servos Allows Arduino UART Control
Feetech TTLinker Mini for SCS Servos Allows Arduino UART Control
€3.60
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, FEETECH, 0.004kg, China
To connect an Arduino to a SCServo digital servo requires a TTLinker comtrol board. The TTLinker is a signal conversion board. Arduino needs to convert its...
In Stock
Ships in 24 Hours
+ −
Servo to Crocodile Clip Adapter Cable
Servo to Crocodile Clip Adapter Cable
€1.50
V1, V2, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, KITRONIK, KITRONIK-4178, 0.001kg, China
If you have a standard servo and need to connect it to a board that accepts crocodile clip connections then our new servo to crocodile clip adapter cable is...
In Stock
Ships in 24 Hours
+ −
Standard Servo Accesory Pack H25T - Pack of 5
Standard Servo Accesory Pack H25T - Pack of 5
€2.80
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.001kg, China, 25T (Futaba/Feetech)
THE PACKAGE INCLUDES 5x Plastic H25T servo horns 2x M3 servo screws for the output shaft 1x Pan head with a #1 Philips drive 1x Socket head...
In Stock
Ships in 24 Hours
+ −
Standard Servo Accesory Pack 307 H25T - Pack of 3
Standard Servo Accesory Pack 307 H25T - Pack of 3
€1.50
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.001kg, China, 25T (Futaba/Feetech)
THE PACKAGE INCLUDES 3x Plastic H25T servo horns 4x Mounting screws 4x Eyelets 4x Grommets 1x Washer
In Stock
Ships in 24 Hours
+ −
Linear Actuator Kit
Linear Actuator Kit
€8.40
V1, V2, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, KITRONIK, KITRONIK-2595, 0.001kg, UK, 25T (Futaba/Feetech)
The Linear Actuator converts the circular movement of the supplied servo into movement in a straight line. Ideal for robots, dioramas or train points switching.
In Stock
Ships in 24 Hours
+ −
Klaw Gripper Kit Mk2
Kitronik Klaw MK2 Robotic Gripper Kit
€9.90
Age: 11+, V1, V2, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, KITRONIK, KITRONIK-25104, 0.001kg, UK, 25T (Futaba/Feetech)
Add a servo powered gripper to your robotics project with the Kitronik Klaw Mk2 Robotic Gripper. This easy to assemble kit also comes with the required servo.
In Stock
Ships in 24 Hours
+ −
Servo Arm - Single 2.1cm (Horn Spline 25T)
Servo Arm - Single 2.1cm (Horn Spline 25T)
€2.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, FEETECH, FK-AP-18-25T, 0.001kg, China, 25T (Futaba/Feetech)
These aluminum Feetech single servo Arm have a length of 2.1mm, a width of 12mm and a Horn Spline 25T compbatible with Futaba Standard servo.
In Stock
Ships in 24 Hours
+ −
Servo Arm - Single 2.6cm (Horn Spline 25T)
Servo Arm - Single 2.6cm (Horn Spline 25T)
€2.50
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, FEETECH, FK-AP-16-25T, 0.002kg, China, 25T (Futaba/Feetech)
These aluminum Feetech single servo Arm have a length of 2.6mm, a width of 12mm and a Horn Spline 25T compbatible with Futaba Standard servo.
In Stock
Ships in 24 Hours
+ −
Servo Arm - Double 5cm (Horn Spline 25T)
Servo Arm - Double 5cm (Horn Spline 25T)
€1.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, FEETECH, FK-AP-4-25T, 0.003kg, China, 25T (Futaba/Feetech)
These aluminum Feetech double servo Arm have a length of 50mm, a width of 10.6mm and a Horn Spline 25T compbatible with Futaba Standard servo.
In Stock
Ships in 24 Hours
+ −
Servo Arm - Single 4.2cm (Horn Spline 25T)
Servo Arm - Single 4.2cm (Horn Spline 25T)
€2.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, FEETECH, FK-AP-17-25T, 0.004kg, China, 25T (Futaba/Feetech)
These aluminum Feetech single servo Arm have a length of 4.2cm, a width of 13mm and a Horn Spline 25T compbatible with Futaba Standard servo.
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

No products with the selected options in stock
Servo Arm - Single 3.5cm Metal (Horn Spline 25T)
Servo Arm - Single 3.5cm Metal (Horn Spline 25T)
€1.60
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, FK-AP-3-BL, 0.005kg, China, 25T (Futaba/Feetech), Aluminum
These aluminum single servo  Arm have a length of 3.5cm, a width of 70mm and a Horn Spline 25T compbatible with Futaba Standard servo.
In Stock
Ships in 24 Hours
+ −
Servo Cable Female to Female 10cm
Servo Cable Female to Female 10cm
€0.60
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.002kg, China
This is a 4" servo cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows.
In Stock
Ships in 24 Hours
+ −
Face Mount for Large Servo Plate A
Face Mount for Large Servo Plate A
€8.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SERVOCITY, 575128, 0.00907kg, Servo Mount
In Stock
Ships in 24 Hours
+ −
Servo Shaft 24T 0.375'' x 0.280''
Servo Shaft 24T 0.375'' x 0.280''
€4.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SERVOCITY, 525144, 0.004535kg, 24T (Hitec)
This 0.375" OD, 0.280" length Servo Shaft may be small but it becomes extremely useful when used in conjunction with a  clamping shaft coupler . The 3/8"...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

No products with the selected options in stock
Servo Hub - Tall (Hitec Standard)
Servo Hub - Tall (Hitec Standard)
€12.40
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SERVOCITY, 525122, 0.00907kg, 24T (Hitec)
These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your C1 Hitec servo spline. These aluminum servo hubs have a length of...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

No products with the selected options in stock
Servo Arm - Double (Hitec Standard Spline)
Servo Arm - Double (Hitec Standard Spline)
€7.40
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SERVOCITY, 525118, 0.00907kg, 24T (Hitec)
These aluminum double servo arms have a length of 2.685”, a width of 0.25”, and utilize the 0.77” hub pattern that can connect directly to your C1 Hitec...
In Stock
Ships in 24 Hours
+ −
Hub Arm - Single (3")
Hub Arm - Single (3")
€13.60
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, SERVOCITY, 545392, 0.03628kg, Aluminum
These aluminum single servo hub arms can bolt directly to the aluminum hub on servo power gearboxes via four 6-32 x 3/8" machine screws. Each double hub arm...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

No products with the selected options in stock
1 2