Home/Robotics/Communication/GPS/GSM/GPRS/3G/Multi-GNSS Module LC76G - GPS, BDS, GLONASS, Galileo, QZSS

Multi-GNSS Module LC76G - GPS, BDS, GLONASS, Galileo, QZSSLC76G GNSS Positioning Module
Supports GPS, Beidou(BDS), Glonass, Galileo, QZSS

Multi-GNSS Module LC76G - GPS, BDS, GLONASS, Galileo, QZSS

Multi-GNSS Module LC76G - GPS, BDS, GLONASS, Galileo, QZSS

SKU:

31-00024370

Part Number: LC76G GNSS Module

CompanyWaveshare Part NumberLC76G GNSS Module

Out of Stock

€18⁶⁰

Our quantity discounts:

Quantity

10+

Price

€16.74

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

LC76G GNSS Positioning Module
Supports GPS, Beidou(BDS), Glonass, Galileo, QZSS

I2C/UART Communication, Provides Multi-Platform Resources And Tutorials For Secondary Development And Integration

The LC76G GPS Module is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS, Galileo and QZSS systems, allows multi-system combined or single-system independent positioning. Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function, provides a good positioning experience of fast, accurate, high-performance.

Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS
Supports UART and I2C communication
Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity
Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function
Supports 1PPS
UART communication baudrate: 9600~921600bps (115200bps by default)
Onboard rechargeable Li battery MS621FE, for preserving ephemeris information and hot starts
2x LEDs for indicating the module working status
Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/Jetson Nano/Arduino/ESP32)

Compatible With Multiple Platforms
Provides Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino Demos And User Manuals, Easier To Develop And Integrate, And Better Expansibility

Multi-GNSS Positioning Support
Supports GPS, Beidou(BDS), Glonass, Galileo, QZSS

What's On Board

PINOUT DEFINITION
VCC	Power supply (3.3V/5V)
GND	Gound
TX	Connect to MCU.RX (Signal direction: TX >> MCU.RX)
RX	Connect to MCU.TX (Signal direction: MCU.TX >> RX)
PPS	GPS status indicator
RST	Reset Pin
SDA	I2C data pin
SCL	I2C clock pin

NOTES

This product is suitable for outdoor positioning (comes with active GPS ceramic antenna by default), if you need to position indoor, it is recommended to purchase: GPS external antenna (with IPX to SMA Adapter) (antenna is placed to the window area, the module is within 3.5m from the antenna).

GNSS: GPS/GLONASS/Galileo/BDS/QZSS
Chip Platform: AG3352
L1 Band Receiver:
- Channels: 47 Tracking ch
- SBAS: Support
A-GNSS: Support
Sensitivity:
- Acquisition: -147dBm
- Re-Acquisition: -159dBm
- Tracking: -166dBm
TTFF (Time To First Fix):
- Cold Starts:
  - 26s, Autonomous
  - 12s, With EASY™
  - 5s, With EPO™
- Warm Starts:
  - 20s, Autonomous
  - 2s, with EASY™
- Hot Starts: 1s
Position Accuracy: 1.5m CEP
Speed Accuracy: 0.1m/s
Acceleration Accuracy (Max): 0.1m/s²
Timing Accuracy: 30ns
Update Rate (Max): 10Hz
I2C Rate: 400Kbps (Max)
UART Baudrate:
- Range: 9600~921600bps
- Default: 115200bps
GNSS Data Update Rate:
- Max: 10Hz
- Default: 1Hz