FREE SHIPPING for orders over 85.00

Pi Display e-Paper 2.13" HAT 250x122 (Black-White)

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial...
31-00012915
Gross Weight: 0.02kg
Company: Waveshare
Made in: China
In Stock
Ships in 24 Hours
Low stock in store
19.90
Without VAT 16.05
+
WISHLIST COMPARE

DESCRIPTION

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

SPECIFICATIONS

Type:
e-Paper
Display Size:
2.13"
Resolution:
250x122
Display Color:
Black & White
Touchscreen:
No
Interface:
  • SPI

EXTRA SPECIFICATIONS

  • Operating voltage: 3.3V / 5V
  • Interface: SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.194 × 0.194
  • Resolution: 250 × 122
  • Display color: black, white
  • Grey level: 2
  • Partial refresh time: 0.3s
  • Full refresh time: 2s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

FEATURES

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Dimensions

2.13inch e-Paper HAT dimensions

Connection

SYMBOL DESCRIPTION
VCC 3.3V / 5V
GND Ground
NC NC
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active