Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας

Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.

Αρχική Σελίδα/Ρομποτική/Raspberry Pi/Raspberry Pi Πρόσθετα (HATs)/Seeed Grove Base HAT for Raspberry Pi

Seeed Grove Base HAT for Raspberry Pi

Κωδικός:

32-00018379

Part Number: 103030275

ΚατασκευαστήςSeeed Studio Part Number103030275 ΣυμβατότηταRaspberry Pi 4, Raspberry Pi 5, Raspberry Pi Zero Τύπος HATPrototyping

Διαθέσιμο

Αποστολή σε 24 ώρες

€12⁸⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

This is the enhanced Grove Pi Hat for Raspberry Pi 2, 3B, 3B+, 4, 5 and Pi Zero series, developed by Seeed Studio. It breaks out all the pins and power of the board, providing 15 multi-function Grove ports and exposing the compatible 24-Pin GPIO and SWD debug interface, allowing for further functionality without the need for disconnection. With its user-friendly design and full support for the Grove ecosystem, this Pi Hat is an excellent companion for starting your Raspberry Pi projects.

Features at a glance

Breaks out all Raspberry Pi pins and power to provide 15 multi-function Grove ports and a compatible 24-Pin GPIO, powered by a 12-bit ADC chip.
Plug and Play: Features user-friendly Grove connectors.
Supporting more than 60 Grove modules.
Rich peripherals for Grove:
- 3 I2C ports
- 1 UART communication port
- 1 PWM port
- 4 Analog ports
- 6 Digital ports

Application Examples

Projects with Grove sensors
Electronics prototyping
SWD debugging
Rapid prototyping
Intelligent control

Technical data

MCU	MM32F031F6P6 or STM32F030F4P6
Operating Voltage	3.3V
Dimensions	55mm×65mm×20mm
Weight	24.5g

Important note: This product comes in variants with two different chips, requiring adjustment of the I2C address based on the chip in use. The I2C address for the STM32 chip (V1.1) is 0x04, while for the MM32 chip (V1.0), it is 0x08.

What is Grove?

Grove is an electronic component ecosystem launched by Seeed Studio where it assembles actuators, displays, sensors, wireless modules and other units, more than 300 in the total count, all sharing the same Grove data transmitted cable.