Αρχική Σελίδα/Ρομποτική/Επικοινωνία/Μετατροπείς USB σε Σειριακό/USB to Serial Module - CP2102

USB to Serial Module - CP2102

Κωδικός:

19-00090173

ΚατασκευαστήςOem

Διαθέσιμο

Αποστολή σε 24 ώρες

€3⁶⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

100+

Τιμή

€2.88

€2.52

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

This miniature, pretty and high quality module is everything you need to convert your USB connection to a serial UART TTL used for many purposes including Arduino and many other boards interface. CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART) Supports baud rates from 300bps ~ 1Mbps Connections pins are 3.3V, DTR, RXI, TXO, GND and 5V from USB Comes with 500mA fuse to protect you from mistakes! 5V supply @ 500mA & 3.3V supply @ 100mA (on chip regulator) Board dimensions less than a square inch, more precisely 16*20mm High quality blue PCB and components.

USB Interface: micro USB connector
Operating Voltage: 5V.
Logic Voltage: 5V.
3.3V power supply output current: 100mA
Pins output method: 6P-2.54mm pin header
Serial baud rate: Up to 115200bps.
Support USB1.1, USB2.0
USB to serial chip (CP2102) supports XP, win7 / win8 32bits, 64bits, Linux，MAC

Embedded USB transceiver, no external circuit needed
Containing clock circuit, no external circuit needed
Contains power-on reset circuit
The on-chip voltage regulator supply 3.3V@ 100mA output
Meet the USB2.0 specification requirements
SUSPEND pins support USB suspend state
Asynchronous serial data bus compatible with all handshakes and modulation controller interface signals
Support data format is 8 data bits, 1 stop bit and the parity bit
Connotation 512 byte receive buffer and 512 byte transmit buffer
Supports hardware or X-ON / X-OFF Handshake
FTDI compactible