Waveshare RP2040-PiZero Development Board

31-00025506
RP2040-PiZero
ΚατασκευαστήςWaveshare Part NumberRP2040-PiZero
Διαθέσιμο
Αποστολή σε 24 ώρες
1240
Ποσοτικές εκπτώσεις:
Ποσότητα
10+
Τιμή
11.16
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

RP2040-PiZero Development Board, Based On Raspberry Pi RP2040 with Onboard DVI Interface, TF Card Slot And PIO-USB Port

What's On Board

  1. USB Type-C connector for communication and program burning
  2. PIO-USB port for using as USB host or slave via PIO
  3. DVI interace (Mini HDMI connector) for driving DVI screen with HDMI cable
  4. TF card slot SPI interface communication
  5. RP2040 dual-core processor, up to 133MHz operating frequency
  6. W25Q128JV 16MB NOR-Flash
  7. RUN button reset button
  8. BOOT button Press it when resetting to enter download mode
  9. Lithium Battery Header PH2.0 header, for connecting 3.7V Lithium battery, allows recharging/discharging the battery
  10. 40PIN GPIO Header Compatible with some Raspberry Pi HATs

Support C/C++, MicroPython, Arduino

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started


* the DVI and PIO-USB functions are only supported in C environment and cannot be used at the same time

Integrates Multiple Interfaces

Onboard DVI Interface, PIO-USB Port And TF Card Slot For More Possibilities

Dual-Core ARM Processor

Dual-Core ARM Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz

Board Specifications

RP2040-PiZero is a high-performance and cost-effective microcontroller board designed by Waveshare, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, easy to develop and integrate into the products.

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264KB of SRAM, and 16MB of onboard Flash memory
  • Onboard DVI interface can drive most HDMI screens (DVI compatibility required)
  • Supports using as a USB host or slave via onboard PIO-USB port
  • Onboard TF card slot for reading and writing TF card
  • Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios
  • USB 1.1 with device and host support
  • Drag-and-drop programming using mass storage over USB
  • Low-power sleep and dormant modes
  • 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 8 × Programmable I/O (PIO) state machines for custom peripheral support

Dimensions

Weight: 0.012 kg

In the box

RP2040-PiZero x1

Κατασκευαστής
Waveshare
Part Number
RP2040-PiZero
Εγγύηση
12 Μήνες Εγγύηση Κατασκευαστή
Καθ. Βάρος
0.023kg
Βρες Παρόμοια
  • Προτείνουμε επίσης