Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
RP2040-PiZero Development Board, Based On Raspberry Pi RP2040 with Onboard DVI Interface, TF Card Slot And PIO-USB Port
What's On Board
- USB Type-C connector for communication and program burning
- PIO-USB port for using as USB host or slave via PIO
- DVI interace (Mini HDMI connector) for driving DVI screen with HDMI cable
- TF card slot SPI interface communication
- RP2040 dual-core processor, up to 133MHz operating frequency
- W25Q128JV 16MB NOR-Flash
- RUN button reset button
- BOOT button Press it when resetting to enter download mode
- Lithium Battery Header PH2.0 header, for connecting 3.7V Lithium battery, allows recharging/discharging the battery
- 40PIN GPIO Header Compatible with some Raspberry Pi HATs
Support C/C++, MicroPython, Arduino
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
* the DVI and PIO-USB functions are only supported in C environment and cannot be used at the same time
Integrates Multiple Interfaces
Onboard DVI Interface, PIO-USB Port And TF Card Slot For More Possibilities
Dual-Core ARM Processor
Dual-Core ARM Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz
Board Specifications
RP2040-PiZero is a high-performance and cost-effective microcontroller board designed by Waveshare, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, easy to develop and integrate into the products.
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 16MB of onboard Flash memory
- Onboard DVI interface can drive most HDMI screens (DVI compatibility required)
- Supports using as a USB host or slave via onboard PIO-USB port
- Onboard TF card slot for reading and writing TF card
- Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios
- USB 1.1 with device and host support
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
Dimensions
Weight: 0.012 kg
In the box
RP2040-PiZero x1
