Αρχική Σελίδα/Ρομποτική/Αναπτυξιακά Εργαλεία/RP2040 & RP2350/Waveshare RP2350 Plus 4MB

Waveshare RP2350 Plus 4MB, Headers: With Pre-soldered Headers

Waveshare RP2350 Plus 4MB, Headers: With Pre-soldered Headers, 2 image

Waveshare RP2350 Plus 4MB

Κωδικός:

31-00029371

Part Number: 29371

Headers:

Without Headers With Pre-soldered Headers

ΚατασκευαστήςWaveshare Part Number29371

Κατόπιν παραγγελίας

Διαθέσιμο σε 45-60 ημέρες

€8⁹⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Προβολη ολων των παραλλαγών ως λίστα

Column filling

Ταξινόμηση Τιμή	Ταξινόμηση Διαθεσιμότητα	Ταξινόμηση Κωδικός	Ταξινόμηση Headers
€8⁹⁰	Διαθέσιμο + − ΑΓΟΡΑ	31-00029371	Headers: With Pre-soldered Headers
€7⁵⁰	Διαθέσιμο + − ΑΓΟΡΑ	31-00029370	Headers: Without Headers

Περιγραφή
Χαρακτηριστικά

This board is based on the RP2350 chip and is an enhanced version of the Raspberry Pi Pico 2. It is fully compatible with most Raspberry Pi Pico 2 modules, with additional features and improvements.

Features

RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150MHz
520KB of SRAM, 4MB on-board Flash memory
Type-C connector, keeps it up to date, easier to use
Lithium battery recharge/discharge header, suitable for mobile devices
Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
Castellated module allows soldering directly to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26× multi-function GPIO pins
2× SPI, 2× I2C, 2× UART, 4× 12-bit ADC, 16× controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
12× Programmable I/O (PIO) state machines for custom peripheral support

Hardware layout

LED, user LED (not power indicator)
USB Type-C connector
ETA6096 high efficiency Lithium battery recharge manager
MP28164 high efficiency DC-DC buck-boost chip
BOOT button, press it when resetting to enter download mode
On-board flash memory, 4MB: W25Q32JVSSIQ
RESET button
RP2350A, dual-core and dual-architecture design, up to 150MHz operating frequency
Battery MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
Pinout, compatible with Raspberry Pi Pico 2
USB test points, connecting to USB interface
BOOT test point, connecting to BOOT button
DEBUG points