FREE SHIPPING for orders over 85.00

Copymaster PLA Filament - 1.75mm 1kg Dark Grey

PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide...
Grey
26-00026904
Gross Weight: 1.4kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: COPYMASTER3D
Part Number: PRE-1KG-DAR
Made in: EU
Out of Stock
Product out of stock
No stock in retail store
From 19.90
15.92
Without VAT 12.84
Profit: 3.98 (20%)
On sale

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

WISHLIST COMPARE

DESCRIPTION

PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite.

PLA is based on polylactic acid and is fully biodegradable and emits no toxic fumes. This means that you don’t have to worry about using the filament indoors with children or pets nearby.

Copymaster3D PLA also has the benefit of very low shrinkage, this means that you will have very accurate prints, but also that the risk of warping is very low.

Even though a heated build platform isn´t required we do recommend it as you will get the best adhesion.

To be extra sure that the print sticks well to the build plate we recommend that you use PrimaFIX. It will make the prints stick better but will also make it much easier to remove the print from the build surface once it cools off.

If you use the heated bed we recommend a temperature between 30-60°C.

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
COPYMASTER3D
Part Number:
PRE-1KG-DAR
Gross Weight:
1.4kg
Made in:
EU
Color:
Grey
Diameter:
1.75mm
Material
:
  • PLA
Printing Temperature:
190-220°C
Reel:
  • 1kg
Roundness:
≥ 95%
Tolerance:
±0,05mm

EXTRA SPECS

  • Basic Data
    • Lenght: 335m
    • Color: Iron grey - RAL 7011
  • Printing Parameter
    • Recomended Printing Temp Min: 190ºC
    • Recomended Printing Temp Max: 220ºC
    • Recomended Printbed Temperature Min: 0ºC
    • Recomended Printbed Temperature Max: 45ºC
    • Recomended Printing Speed Min: 40mm/s
    • Recommended Printing Speed Max: 150mm/s
    • Recomended Fan Speed Min: 60%
    • Recomended Fan Speed Max: 100%
  • General
    • Specific gravity: 1.24 g/cm3 ASTM D792
  • Temperature
    • Heat deflection temp: 50°C
  • Tensile
    • Tensile strength: 45MPa
  • Elongation
    • Elongation at yield: 5.3% ASTM D638
    • Elongation at break: 13.3% ASTM D638
  • Flexural
    • Flexural Strenght: 63.64% ISO 178
    • Flexural Modulus: 2157 ISO 178
  • Other
    • Impact Strength: 17KJ/m2 ISO 179

FEATURES

  • Outstanding price to performance ratio
  • PLA is the easiest filament to print with
  • Good for professionals as well as for beginners
  • Good for making high-resolution parts
  • No shrinking after cooling
  • Low risk of warping
  • Low melting point
  • Wide range of attractive colors available
  • No toxic fumes
  • Biodegradable