Home/Robotics/Displays/E-Paper/e-Paper Display Module 1.02" 128x80 (Black-White)

e-Paper Display Module 1.02" 128x80 (Black-White)

SKU:

31-00017575

Part Number: 1.02inch e-Paper Module

CompanyWaveshare Part Number1.02inch e-Paper Module

In Stock

Ships in 24 Hours

€18⁶⁰

Our quantity discounts:

Quantity

10+

Price

€16.74

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

This is an E-Ink display module, 1.02inch, 128×80 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Interface

SYMBOL	DESCRIPTION
VCC	3.3V / 5V power input
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active

Operating voltage: 3.3V / 5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 42mm × 27mm
Display size: 21.76mm × 14mm
Dot pitch: 0.175 × 0.17
Resolution: 128 × 80
Display color: black, white
Grey scale: 2
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino/Nucleo

Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)