Home/Robotics/Displays/E-Paper/e-Paper Segment Module 1.9" 91 Segments

e-Paper Segment Module 1.9" 91 Segments

SKU:

31-00022689

Part Number: 1.9inch Segment e-Paper Module

CompanyWaveshare Part Number1.9inch Segment e-Paper Module

In Stock

Ships in 24 Hours

€16²⁰

Our quantity discounts:

Quantity

10+

Price

€14.58

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

1.9″ Segment E-Paper Module
Support Partial Refresh, Low Power, Wide Viewing Angle, Paper-Like Displaying Without Electricity

Ideal for Temperature and Humidity meter, Humidifier, Digital Meter...

Advantages Of eINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

91 Segments Full Display

Onboard I2C Control Interface
For Use With Controller Boards Like Raspberry Pi/STM32/Arduino

VCC	Power (3.3V / 5V input)
GND	Ground
SDA	I2C data input
SCL	I2CI clock input
RST	External reset, low active
BUSY	Busy status output pin (high level means busy)

Application Examples
Suitable For Temperature And Humidity Meter, Humidifier, Digital Meter...

Operating Voltage: 3.3V/5V
Size: 1.9″
Display Size: 41.35×28.11mm
Segments: 91
Viewing Angle: >170°
Display Color: Black/White
Grey Scale: 2
Full Refresh Time: 2s
Refresh Power: <5mW (typ.)
Stanby Current: <0.01uA (almost none)
Communication: I2C
Display Panel: E-paper
Experience: Paper-like
Environment: Ambient Light Required
Display Type: Passively Reflective
Outline Dimensions: 51×34 mm

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
I2C interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.

Onboard MOS voltage translating circuit, compatible with 3.3V/5V MCUs
Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)