FREE SHIPPING for orders over 85.00

Pi Display e-Paper 7.3" ΗΑΤ 800x480 (Red/Yellow/Black/White)

7.3″ E-Paper HAT  (G) Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity Ideal for price tags, shelf labels, industrial...
31-00022772
Gross Weight: 0.19kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: WAVESHARE
Part Number: 7.3inch e-Paper HAT (G)
Made in: China
Out of Stock
Product out of stock
No stock in retail store
73.20
Without VAT 59.03

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

WISHLIST COMPARE

DESCRIPTION

7.3″ E-Paper HAT (G)
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

Advantages Of eINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.

E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header
Compatible With Raspberry Pi Series Boards, Jetson Nano

for reference only, the Raspberry Pi & Jetson is NOT included.

Onboard SPI Control Interface
For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

VCC Power (3.3V / 5V input)
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output pin

Application Examples
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
WAVESHARE
Part Number:
7.3inch e-Paper HAT (G)
Gross Weight:
0.187kg
Made in:
China
Type:
e-Paper
Display Size:
7.3"
Resolution:
800x480
Display Color:
Red-Yellow-Black-White
Touchscreen:
No
Interface:
  • SPI

EXTRA SPECS

  • Operating Voltage: 3.3V/5V
  • Size: 7.3″
  • Display Size: 160×96mm
  • Dot Pitch: 0.2×0.2mm
  • Resolution: 800×480 pixels
  • Viewing Angle: >170°
  • Display Color: Red/Yellow/Black/White
  • Grey Scale: 2
  • Full Refresh Time: 16s
  • Refresh Power: <85mW (typ.)
  • Stanby Current: <0.01uA (almost none)
  • Communication: 3-wire SPI, 4-wire SPI
  • Display Panel: E-paper
  • Experience: Paper-like
  • Environment: Ambient Light Required
  • Display Type: Passively Reflective
  • Outline Dimensions: 170.2 × 111.2mm

FEATURES

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)

FILES