FREE SHIPPING for orders over 85.00

Relay Module - 1 Channel 5V Low Level Trigger (Screw Terminals)

by OEM
This 1 channel 5V 10A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas...
19-00010785
Gross Weight: 0.02kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: OEM
Made in: China
In Stock
Ships in 24 Hours
Available in store
1.90
Without VAT 1.53
+
Our quantity discounts:
Quantity 10+ 100+
Price 1.52 1.33
WISHLIST COMPARE

DESCRIPTION

This 1 channel 5V 10A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas isolation trenches it has a single relay a genuine.

The inputs of 1 Channel 5V 10A Relay Module are isolated to protect any delicate control circuitry.

The power supply and relay instructions, lit, a disconnect are off. The input signal, signal, common Terminal and start conducting. It can be used as a single chip module for appliance control and work with both DC or AC signals where you can control the 220V AC load.

A wide range of microcontrollers such as Arduino, AVR, PICARM and so on can control it.

NOTES

  • On the high level and low level-triggered mode, friends who do not understand, have a look
    • High-level trigger refers to the signal voltage between input and trigger, can be understood as a signal input with VCC cathode short-circuit triggered a way;
    • Low-level trigger refers to the signal voltage between the input terminal and Earth OV trigger, can be understood as a signal input terminal and the GND negative electrode short circuit triggered is a way  1-channel relay module connection.

SPECIFICATIONS

Type of Modules:
  • Relay
Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
OEM
Gross Weight:
0.017kg
Made in:
China
Rated Coil Voltage:
5VDC
Contact Current Max. :
10A
Type / Contacts Config.:
  • SPDT
  • Module

EXTRA SPECS

  • Operating Voltage(VDC): 5
  • Max. Current(mA): 20
  • Channel: 1
  • Current Capacity at AC250V: 10A
  • Current Capacity at DC30V: 10A
  • Dimensions: 56x17x16mm

FEATURES

  • High impedance controller pin
  • Pull-down circuit for the avoidance of malfunction
  • One normally closed contact and one normally open contact
  • Triode drive, increasing relay coil
  • Power supply indicator lamp
  • Control indicator lamp
  • With 4 fixed screw holes, hole diameter 3.1mm, convenient installation, and fixation