Light / Imaging

19-00019088
This is a very small light sensor. A photocell changes (also called a photodetector, photo resistor, CdS or photoconductive cell) resistance depending on the amount of light it is exposed to.
Sensor TypeLuminosity InterfaceAnalog CompanyOEM
020
In Stock
+
13-00037502
A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. This...
Sensor TypeColor , Luminosity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
1096 1370 You save: 2.74
Out of Stock
13-00012919
Detect six distinct channels of visible light with this fancy-pants spectral sensor! Unlike normal RGB colour sensors, with the AS7262 you'll get six bands of colour readings that roughly translate to red, orange, yellow, green, blue, and violet. Rainbow-y! The two on-board white LEDs mean...
Sensor TypeLuminosity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
2840
In Stock
+
13-00012920
This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm.  The LTR-559 is the same sort of sensor that you'd find next to the camera in your phone to detect when it's next to your ear and when your phone should...
Sensor TypeLuminosity, Proximity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
1210
In Stock
+
31-00017146
TSL25911 High Sensitivity Digital Ambient Light Sensor, Wide Dynamic Range, I2C Interface This is a high sensitivity digital ambient light sensor module based on TSL25911, features 600M:1 wide dynamic range, detects light intensity up to 88000Lux, controlled via I2C interface, low power...
Sensor TypeLuminosity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
490
In Stock
+
19-00011019
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that's detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index...
Sensor TypeUltraViolet Typical Input Voltage3.3VDC InterfaceAnalog
1990
In Stock
+
32-00018353
This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from traditional analog light sensor, as   Light Sensor LDR , this digital module features a selectable light spectrum range due to its dual light sensitive diodes:...
Sensor TypeLuminosity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
1190
Out of Stock
31-00019564
AS7341 Spectral Color Sensor Allows Color Temperature Measurement, Color Identification, Ideal For Compact Spectrometer Compatible With Various Platforms Including Arduino, STM32, Raspberry Pi Multi Channels, High Precision Features Incorporates AS7341 chip, which integrates 8x...
Sensor TypeColor , Luminosity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
2480
In Stock
+
19-00019843
This is a Light Intensity Detection Module based on the BH1750 chip. BH1750FVI is a digital Ambient Light Sensor IC for the I2C bus interface. This IC is the most suitable to receive the ambient light data for adjusting LCD and Keypad backlight power of the Mobile phone. It is possible to...
Sensor TypeLuminosity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
300
In Stock
+
39-00013305
This is the RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more...
Sensor TypeColor Typical Input Voltage3.3VDC InterfaceDigital
360
In Stock
+
25-00016190
Here comes DFRobot's new Analog Ambient   Light Sensor for Arduino   or Raspberry Pi. Brand new design and much more convenient to use. This sensor help you to detect the light density and reflect the analog voltage signal back to Arduino controller. You can set the threshold of voltage level...
Sensor TypeLuminosity Typical Input Voltage3.3VDC, 5VDC InterfaceAnalog
320
In Stock
+
25-00016196
Light sensors are probably one of the most common sensors in life, they can be found in your laptop, phone or home lighting system. A light sensor measures the level of light in a room or ambient light in a space.  This module uses a special ambient light detector (TEMT6000) with spectral...
Sensor TypeLuminosity Typical Input Voltage3.3VDC, 5VDC InterfaceAnalog
730
In Stock
+
25-00016203
This UV Sensor with GUVA-S12SD chip is suitable for detecting the UV raditation in sunlight. It can be used in UV Index Monitoring, DIY project, UV-A Lamp Monitoring, Plants growing Environmental monitoring...etc. It can detect the UV wavelength of 200-370nm, fast response, linear analog...
Sensor TypeUltraViolet InterfaceAnalog CompanyDFRobot
730
In Stock
+
25-00016232
We live in a colorful world, but how much do you really know about color? Your eyes may deceive you, while the sensors don’t lie. This Gravity: AS7341 11-Channel Visible Light Sensor can tell you the truth about color. Gravity: AS7341 11-Channel Visible Light Sensor employs the new generation...
Sensor TypeColor Typical Input Voltage3.3VDC, 5VDC Oparating Current5mA
2170
In Stock
+
25-00016236
Devices with True Tone technology like Apple iPad Pro, iPhone, and Macs usually feature sensors that measure the ambient light colour and brightness. The device then uses this information to automatically adjust its display, so it can correct white points and illumination based on your...
Sensor TypeColor Typical Input Voltage3.3VDC, 5VDC Oparating Current5mA
2170
In Stock
+
25-00016247
This multifunctional environmental sensor comprises SHTC3   temperature & humidity sensor , BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and LTR390 UV sensor (V1.0 : ML8511, V2.0 : LTR390-UV-01) into one and offers 5 kinds of environmental parameters.   Professional...
Sensor TypeLuminosity, Humidity, Barometric pressure, UltraViolet, Temperature Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
3680
In Stock
+
25-00016206
This barometric pressure temperature sensor is equipped with TDK's newly-launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-leading relative accuracy, and temperature offset coefficient. The Gravity:...
Sensor TypeBarometric pressure Typical Input Voltage3.3VDC, 5VDC Oparating Current2mA
1240
In Stock
+
25-00016205
The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity sensor element. It features standard I2C interface and a wide voltage supply of 2V-5V. And with the simple peripheral circuit, it performs stably...
Sensor TypeTemperature , Humidity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
580
In Stock
+
25-00016142
This Gravity: LTR390-UV sensor from DFRobot provides both ambient light and UV sensing with UV spectral response from 280nm to 430nm and raw data output. It features high sensitivity, quick response, and strong anti-interference ability. With built-in ADC and MCU, this UV module can convert...
Sensor TypeUltraViolet Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
990
In Stock
+
25-00016132
What is an Ambient Light Sensor? An ambient light sensor is a type of sensor that measures the amount of light in the surrounding environment. These sensors can be used in various applications, including lighting and backlighting control and ambient light sensing. It is also used in...
Sensor TypeLuminosity Typical Input Voltage5VDC InterfaceDigital
1180
In Stock
+
Product filters
Sensor Type
Communication Protocol
Interface
Typical Input Voltage
Manufacturer
    Show all (7)
Bestsellers