Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας (οι κωδικοί χρησιμοποιούν πολύ ασφαλή μέθοδο κρυπτογράφησης)

Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.

Αρχική Σελίδα/Ρομποτική/Raspberry Pi/Raspberry Pi Πρόσθετα (HATs)/Waveshare LC29H(DA) Dual-band GPS HAT - RTK Rover

Waveshare LC29H(DA) Dual-band GPS HAT - RTK Rover, 2 image

Waveshare LC29H(DA) Dual-band GPS HAT - RTK Rover, 3 image

Waveshare LC29H(DA) Dual-band GPS HAT - RTK Rover, 4 image

Waveshare LC29H(DA) Dual-band GPS HAT - RTK Rover, 5 image

Waveshare LC29H(DA) Dual-band GPS HAT - RTK Rover

Κωδικός:

31-00025279

Part Number: LC29H(DA) GPS/RTK HAT

ΚατασκευαστήςWaveshare Part NumberLC29H(DA) GPS/RTK HAT ΣυμβατότηταRaspberry Pi 4, Raspberry Pi 5, Raspberry Pi Zero Τύπος HATGPS, Wireless Communication

Διαθέσιμο

Αποστολή σε 24 ώρες

€74⁸⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€67.32

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

The LC29H series can track L1+L5 dual-frequency and multi-GNSS signals, reducing multipath effects in urban canyons and improving positioning accuracy while maintaining low power consumption. With built-in LNA and SAW filter to achieve high sensitivity and strong anti-interference capability. Adopts dual-band positioning and RTK technology to meet the need of centimeter-level high-precision positioning. Ideal for real-time tracking systems and sharing economy applications, helping to develop applications such as drones, smart farm machinery, shared two-wheelers, etc.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance
Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with cold start when powered on to 5 seconds
Support QGNSS software, easy to set various module functions
Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
Onboard 4 LED indicators for module operating status
Comes with online development resources and manual (Python examples for Raspberry Pi/Jetson Nano)

RTK Mobile Station, RTK base station, Centimeter positioning

The LC29H(BS) module is used as an RTK Base Station, while the LC29H(DA) module is used as an RTK Mobile Station. By setting up continuous running reference stations on the ground known fixed coordinates using the LC29H (BS) module, or by paid RTK base station enhanced services, transmitting GNSS calibration value to LC29H (DA) terminals which uploading rough positioning data, the terminals, with errors like multipath refraction, is able to calculate error value in real time, for centimeter-level positioning in seconds.

Technical data

Product		LC29H(AA) GPS HAT	LC29H(DA) GPS/RTK HAT	LC29H(BS) GPS/RTK HAT	ZED-F9P GPS-RTK HAT
Frequency band		GPS/QZSS: L1C/A, L5 BDS: B1I, B2a Galileo: E1, E5a GLONASS: L1			GPS/QZSS: L1C/A, L2C BDS: B1I, B2I Galileo: E1B/C, E5a GLONASS: L1OF, L2OF
NUMBER OF CONCURRENT GNSS		GPS/QZSS+BDS+Galileo+GLONASS
SBAS (WAAS, EGNOS, MSAS, GAGAN)		support	-		support
RTK Function		-	RTK Rover	RTK Base	RTK Rover and Base
Positioning Accuracy	PVT	1m CEP		-	1.5m CEP
	RTK	-	0.01m+1ppm CEP	-	0.01m+1ppm CEP
Navigation Update Rate	PVT	1~10Hz		-	1~10Hz
	RTK	-	1Hz	-	1~8Hz
	RAW	1Hz			1~20Hz
RTK Convergence Time		-	<10s	-	<10s
Time to first fix (AGNSS Off)	Cold starts	26s		-	24s
	Hot starts	1s		-	2s
	Aided starts	16s		-	2s
Time to first fix (EASY on)		2s	-
Time to first fix (AGNSS On)	Cold starts	5s		-	TBD
	Hot starts	5s		-	TBD
	Aided starts	5s		-	TBD
Sensitivity	Tracking and navigating	-165dBm			-167dBm
	Re-acquisition	-159dBm	-157dBm	-159dBm	-160dBm
	Cold starts	-147dBm	-145dBm	-147dBm	-148dBm
Velocity accuracy		0.2m/s	-		0.05m/s
PPS accuracy		20ns	-		30ns
Dynamic performance		Acceleration (Max): 4g Velocity (Max): 500m/s LC29H(XX) HAT Altitude (Max): 10000m ZED-F9P GPS-RTK HAT Altitude (Max)：50000m
Communication interface		LC29H(XX) HAT:UART(9600~3000000bps, 115200bps by default),I2C(Max 400KHz) ZED-F9P GPS-RTK HAT:USB, UART(4800~921600bps, 9600bps by default), I2C(Max 400KHz), SPI(5MHz)
Protocol		NMEA 0183 V4.10, RTCM 3.x			NMEA 0183 V4.10，UBX, RTCM 3.3
Power supply		5V
Overall Current		<40mA@5V (Continue mode)
Operating temperature		-40~85℃

What's on board

1. LC29H module
2. RT9166A-28PXL, 5V to 2.8V LDO chip
3. CP2102N, USB to UART chip
4. Raspberry Pi 40PIN GPIO header for connecting with Raspberry Pi
5. UART selection jumper: (A) control the LC29H via USB to UART, (B) control the LC29H via Raspberry Pi, (C) access Raspberry Pi via USB to UART
6. IPEX 1 antenna connector
7. Micro USB interface
8. RT9193-33PB, 5V to 3.3V LDO chip
9. RESET button
10. Status Indicators (PWR, RXD/TXD, PPS)
11. NDC7002N, I2C voltage translator
12. ML1220 Battery holder