ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

WeMos D1 mini Pro ESP8266 (V1.0) - 16Mbytes

από WEMOS
The WeMos D1 min PRO is a miniature wireless 802.11 (Wifi) microcontroller development board. It turns the very popular ESP8266 wireless microcontroller...
19-00010999
Ογκομετρικό βάρος: 0.01kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: WEMOS
Χώρα Προέλευσης: Κίνα
Εξαντλημένο
Το προϊόν δεν είναι διαθέσιμο
Χωρίς απόθεμα στο φυσικό κατάστημα
7.90
Χωρίς ΦΠΑ 6.37

Συναινώ ώστε η εταιρεία (GRobotronics) να προσθέσει την διεύθυνση ηλεκτρονικού μου ταχυδρομείου στην λίστα ώστε να λάβω ενημέρωση όταν το προϊόν θα είναι ξανά διαθέσιμο. Μόλις το προϊόν γίνει ξανά διαθέσιμο θα λάβω αυτόματα ενημέρωση στο email αυτό και αμέσως θα αφαιρεθεί από την συγκεκριμένη λίστα.

Το email σου θα χρησιμοποιηθεί αποκλειστικά για τον σκοπό αυτό και καμία άλλη ενημέρωση δεν θα λάβεις. Θα είναι ορατό μόνο από συγκεκριμένους εξουσιοδοτημένους υπαλλήλους της εταιρείας.

Έχετε το δικαίωμα σε περίπτωση κατά την οποία θεωρείτε ότι η επεξεργασία που γίνεται δεν είναι σύμφωνη με τα ανωτέρω να αναζητείτε την προστασία της Αρχής Προσωπικών Δεδομένων και να ζητήσεις να διαγράψουμε ή να μεταβάλλουμε τα δεδομένα σου. Είμαστε υποχρεωμένοι σύμφωνα με τον κανονισμό της ΕΕ για την Προστασία των Γενικών Προσωπικών Δεδομένων να σε ενημερώσουμε για αυτό το δικαίωμα. Έχετε την δυνατότητα να επικοινωνείτε όποτε επιθυμείτε με την εταιρεία ώστε να ενημερωνόσαστε σχετικά με τα προσωπικά σας δεδομένα στο email [email protected]

ΑΓΑΠΗΜΕΝΑ ΣΥΓΚΡΙΣΗ

ΠΕΡΙΓΡΑΦΗ

The WeMos D1 min PRO is a miniature wireless 802.11 (Wifi) microcontroller development board. It turns the very popular ESP8266 wireless microcontroller module into a fully fledged development board. Programming the D1 mini pro is as simple as programming any other Arduino based microcontroller as the module includes a built in microUSB interface allowing the module to be programmed directly from the Arduino IDE (requires the ESP8266 support to be added via board manager) with no additional hardware. 

The D1 mini Pro is also designed to allow Wemos compatible shields to be plugged into the board in a similar way to the Arduino development board platform which greatly expands its capabilities. There is already a large range of compatible shields available and can also be purchased via our website. Included with the module is a set of headers (requires soldering) that allow thses shield to be easily added or removed from the D1 mini PRO.

Other features of the D1 Mini Pro include 11 digital input/output pins, 1 analogue input pin (3.2V Max), 16MB (128M bit) Flash, an external antenna connector, built in ceramic antenna and houses the new CP2104 US to UART IC. The D1 Pro is the same size as the D1 mini, but is lighter. 

 

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  • 1x WeMos D1 mini Pro
  • 2x Long female pin
  • 2x Short female pin
  • 2x Normal pin

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
WEMOS
Μικτό Βάρος:
0.008kg
Χώρα Προέλευσης:
Κίνα

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Microcontroller: ESP-8266EX
  • Operating Voltage: 3.3V
  • Digital I/O Pins: 11
  • Analog Input Pins: 1(Max input: 3.2V)
  • Clock Speed: 80MHz/160MHz
  • Flash: 16M bytes
  • Dimensions: 34.2x25.6x4mm
  • Weight: 2.5g

ΔΥΝΑΤΟΤΗΤΕΣ

  • 11 digital input/output pins
  • Interrupt/pwm/I2C/one-wire
  • 1 analog input(3.2V max input)
  • 16M bytes(128M bit) Flash
  • External antenna connector
  • Built-in ceramic antenna
  • New CP2104 USB-TO-UART IC
  • Same size as D1 mini, but more light
  • Lots of Shields