Home/Robotics/Raspberry Pi/Raspberry Pi HATs/DFRobot IO Expansion HAT for Raspberry Pi 5 / Pi 4 & Zero series

DFRobot IO Expansion HAT for Raspberry Pi 5 / Pi 4 & Zero series, 2 image

DFRobot IO Expansion HAT for Raspberry Pi 5 / Pi 4 & Zero series, 3 image

DFRobot IO Expansion HAT for Raspberry Pi 5 / Pi 4 & Zero series, 4 image

DFRobot IO Expansion HAT for Raspberry Pi 5 / Pi 4 & Zero series

SKU:

25-00016981

Part Number: DFR0604

CompanyDFRobot Part NumberDFR0604

In Stock

Ships in 24 Hours

€13⁹⁰

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

This DFRobot IO Expansion HAT provides Digital, Analog, I2C, PWM, UART and SPI port to meet all your needs. The board leads out the I/O ports on Raspberry Pi including I2C, UART, SPI and digital, among which the digital ports are led out via the GPIO16~GPIO25(BCM) of Raspberry Pi, so these ports can be directly used. Besides, the PWM and Analog ports are led out through the on-board MCU STM32 that can communicate with Raspberry Pi via I2C. So combing with our related libraries, users are able to conveniently use Raspberry Pi to control PWM output or read ADC input. This expansion board supports 5V power supply and 3.3V sensor modules. Its PWM port can be powered by external power (6~12V) or Raspberry Pi (5V).

Features

On-board MCU(STM32), provide 12 bit 8 channel ADC
Multiple servos controlling
Supports PWM external power supply (6~12V)
Supports Raspberry Pi 5 / Pi 4 Model B / Pi 3B+ / Pi 2 / Pi Zero / Pi Zero W / Pi Zero 2 W

Technical data

MCU: STM32F030
Power Supply:
- Expansion Hat Power Voltage: 5V
- PWM External Power: 6~12V
Expansion Hat Port Output Voltage: 3.3V
22 Ports: 4× PWM ports, 4× analog ports, 10× digital ports, 1× SPI, 2× I2C ports, 1× UART
Device Address: 0x10
Dimensions: 65×30mm