Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας (οι κωδικοί χρησιμοποιούν πολύ ασφαλή μέθοδο κρυπτογράφησης)

Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.

Αρχική Σελίδα/Ρομποτική/Αισθητήρες/Κίνησης/Gravity I2C Triple Axis Accelerometer - LIS2DH (±16g)

Gravity I2C Triple Axis Accelerometer - LIS2DH (±16g)

Κωδικός:

25-00016199

Part Number: SEN0224

ΚατασκευαστήςDFRobot Part NumberSEN0224

Προπαραγγελία

Αναμένεται την Τετάρτη, 4 Ιούνιος 2025

€6⁰⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

DFRobot presents the ultra low-power Arduino triple axis accelerometer! This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode. The module is fitted with a Gravity I2C interface for easy plug and play integration in to your projects. The build in LDO power management chip gives you a wide range of input voltages, from 3.3 – 5V. The on-board I2C level conversion also makes it compatible with 3.3 and 5V devices.

Compared to traditional ADXL345, The LIS2DH accelerometer has advantages such as extra stability and more efficient power consumption. Low power mode requires only 2μA, while normal mode requires 11μA. At maximum the module supports an output frequency of 5.3KHz. Sensitivity levels are adjustable to either +-2g, +-4g, +-8g or +-16g and the module supports 16-bit data outputs. There are 2 independent programmable interrupt generators for free-fall and motion detection, that will activate interrupt wake-up. This module has many potential applications including wearable tech, display orientation and impact recognition.

Operating Voltage: 3.3V ~ 5V
Operating Current: 2uA (low-power mode 50Hz ODR) / 11uA (normal mode 50Hz ODR)
Interface: Gravity-I2C interface
Adjustable Sensitivity: ± 2g / ± 4g / ± 8g / ± 16g
Frequency: 1Hz ~ 5.3KHz
16-bit data output
2 independent programmable interrupt generators for free-fall and motion detection
6D/4D orientation detection
Embedded Temperature Sensor
Embedded FIFO
1 million grams of high impact resistance
Operating Temperature: -40 ℃ ~ +85 ℃
Module Size: 26.2x26.2mm
Weight: 12 g