ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Οπτικός Αισθητήρας Σκόνης - GP2Y1014AU0F

Sharp’s GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles.

19-00019690
Ογκομετρικό βάρος: 0kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: Sharp Microelectronics
Part Number: GP2Y1014AU0F
Χώρα Προέλευσης: Κίνα
Πληροφορίες: Το προϊόν είναι εξάρτημα και δεν αποτελεί έτοιμη συσκευή.
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
Από 8.90
4.45
Χωρίς ΦΠΑ 3.59
Κέρδος: 4.45 (50%)
Σε Προσφορά
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 7.12

ΠΕΡΙΓΡΑΦΗ

This simple dust sensor is a great way to add basic particulate sensing to your next project. It's not as fully featured as our PM2.5 I2C/UART-based sensors, with just a single analog voltage output. However, for the price, it can't be beat! The SHARP GP2Y1014AU0F Dust Sensor Module Kit particulate sensor uses an LED to bounce off of particles suspended in the air - much like you can clearly see how dusty the air is when a sun beam lights up your room!

This sensor has a few tradeoff's compared to our other PM2.5 sensors:

  • You need a fast GPIO toggle to trigger the measurements, for that reason it's only for use with Arduino or other non-interpreted languages. E.g. not for use with CircuitPython
  • You only get an analog voltage output that tells you how dusty it is - higher voltage = dustier, ranging from 0 to 0.5 mg/m3. It isn't precise!
  • You need to power it from 5V - however the output voltage can be read by a microcontroller that's running on 3.3V (the analog output maxes out at 3.6V)

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Είδος Περιφερειακού:
  • Αισθητήρες
Κατασκευαστής
:
Sharp Microelectronics
Part Number:
GP2Y1014AU0F
Μικτό Βάρος:
0.001kg
Χώρα Προέλευσης:
Κίνα
Πληροφορίες:
Το προϊόν είναι εξάρτημα και δεν αποτελεί έτοιμη συσκευή.
Τύπος Αισθητήρα:
  • Σκόνης
Τυπική Τάση Εισόδου:
  • 5VDC
Ρεύμα Λειτουργίας:
11mA
Διασύνδεση:
  • Αναλογική
Πρωτόκολλο Eπικοινωνίας:
  • Χωρίς

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Type: Dust Sensor
  • Sensor Type: Dust
  • Maximum Operating Temperature: + 65 C
  • Minimum Operating Temperature: - 10 C
  • Operating Supply Voltage: 5V
  • Output Voltage: 0.6V
  • Current Rating: 11 mA
  • Sensitivity: 0.5 V/(100 ug/m3)
  • Supply Voltage - Max: 5.5 V
  • Supply Voltage - Min: 4.5 V
  • Unit Weight: 17 g

To use:

  • Connect Blue wire to 5V through a 150 ohm resistor (included)
  • Connect included 220uF capacitor between 5V and ground.
  • Connect Yellow and Green wires to Ground
  • Connect White wire to a digital output (to control the LED)
  • Connect Black wire to an analog input (say A0)
  • Connect Red wire to 5V

ΑΡΧΕΙΑ