FREE SHIPPING for orders over 85.00

Optical Dust Sensor - GP2Y1014AU0F

This simple dust sensor is a great way to add basic particulate sensing to your next project. It's not as fully featured as our PM2.5 I2C/UART-based...
19-00019690
Gross Weight: 0kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Part Number: GP2Y1014AU0F
Made in: China
Πληροφορίες: Το προϊόν είναι εξάρτημα και δεν αποτελεί έτοιμη συσκευή.
In Stock
Ships in 24 Hours
No stock in retail store
From 8.90
4.45
Without VAT 3.59
Profit: 4.45 (50%)
On sale
+
Our quantity discounts:
Quantity 10+
Price 7.12
WISHLIST COMPARE

RELATED PRODUCTS

DESCRIPTION

This simple dust sensor is a great way to add basic particulate sensing to your next project. It's not as fully featured as our PM2.5 I2C/UART-based sensors, with just a single analog voltage output. However, for the price, it can't be beat! The SHARP GP2Y1014AU0F Dust Sensor Module Kit particulate sensor uses an LED to bounce off of particles suspended in the air - much like you can clearly see how dusty the air is when a sun beam lights up your room!

This sensor has a few tradeoff's compared to our other PM2.5 sensors:

  • You need a fast GPIO toggle to trigger the measurements, for that reason it's only for use with Arduino or other non-interpreted languages. E.g. not for use with CircuitPython
  • You only get an analog voltage output that tells you how dusty it is - higher voltage = dustier, ranging from 0 to 0.5 mg/m3. It isn't precise!
  • You need to power it from 5V - however the output voltage can be read by a microcontroller that's running on 3.3V (the analog output maxes out at 3.6V)

SPECIFICATIONS

Type of Modules:
  • Sensor
Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
Sharp Microelectronics
Part Number:
GP2Y1014AU0F
Gross Weight:
0.001kg
Made in:
China
Πληροφορίες:
Το προϊόν είναι εξάρτημα και δεν αποτελεί έτοιμη συσκευή.
Sensor Type:
  • Dust
Typical Input Voltage:
  • 5VDC
Oparating Current:
11mA
Interface:
  • Analog
Communication Protocol:
  • Without

EXTRA SPECS

  • Type: Dust Sensor
  • Sensor Type: Dust
  • Maximum Operating Temperature: + 65 C
  • Minimum Operating Temperature: - 10 C
  • Operating Supply Voltage: 5V
  • Output Voltage: 0.6V
  • Current Rating: 11 mA
  • Sensitivity: 0.5 V/(100 ug/m3)
  • Supply Voltage - Max: 5.5 V
  • Supply Voltage - Min: 4.5 V
  • Unit Weight: 17 g

To use:

  • Connect Blue wire to 5V through a 150 ohm resistor (included)
  • Connect included 220uF capacitor between 5V and ground.
  • Connect Yellow and Green wires to Ground
  • Connect White wire to a digital output (to control the LED)
  • Connect Black wire to an analog input (say A0)
  • Connect Red wire to 5V

FILES