FREE SHIPPING for orders over 85.00

Waveshare 3-axis Magnetometer Sensor - BMM150

BMM150 3-Axis Magnetometer Sensor, Digital Compass Sensor, Magnetic Field Measurement Suitable for compass, electronic compass applications...
31-00024657
Gross Weight: 0.01kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: WAVESHARE
Part Number: 24657
Made in: China
In Stock
Ships in 24 Hours
No stock in retail store
8.60
Without VAT 6.94
+
Our quantity discounts:
Quantity 10+
Price 6.88
WISHLIST COMPARE

DESCRIPTION

BMM150 3-Axis Magnetometer Sensor, Digital Compass Sensor, Magnetic Field Measurement
Suitable for compass, electronic compass applications

Supports Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32 ...

This is a digital compass sensor based on BMM150, supports magnetic field measuring in three perpendicular axes, I2C / SPI interfaces, can be used in robot navigation and positioning, electronic compass, magnetic heading devices, etc.

Supports I2C And SPI Interfaces Control
For Use With Controller Boards Like Raspberry Pi/Raspberry Pi Pico/ESP32/Arduino

PIN I2C PIN SPI
VCC 3.3V/5V power supply VCC 3.3V/5V power supply
GND Ground GND Ground
SDA I2C data SDO SPI data, can be connected to host MISO
SCL I2C clock SDI SPI data, can be connected to host MOSI
INT interrupt output, can be connected to I/O SCK SPI clock input
    CS Chip selection, can be connected to I/O
    DRY Data sending/receiving ready state, can be connected to I/O

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
WAVESHARE
Part Number:
24657
Gross Weight:
0.005kg
Made in:
China
Sensor Type:
  • Compass
  • Magnetometer
Typical Input Voltage:
  • 3.3VDC
  • 5VDC
Interface:
  • Digital
Communication Protocol:
  • I2C
  • SPI

EXTRA SPECS

  • Communication Interface: I2C / SPI (I2C bus by default)
  • Power Supply: 3.3V~5V
  • Magnetic Measuring Range: 1300μt (X, Y axis), 2500μt (Z axis)
  • Resolution: 0.3μT
  • Operating Temperature: -40℃ ~ +85 ℃
  • Dimensions: 29x20mm

FEATURES

  • Onboard BMM150 for measuring magnetic field in three perpendicular axes
  • Supports I2C/SPI interface communication, I2C interface by default, SPI switchable via onboard resistor
  • Onboard voltage translator, compatible with 3.3V/5V level
  • Comes with online development resources and manual (examples for Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32)

FILES