Αρχική Σελίδα/Ρομποτική/Raspberry Pi/Raspberry Pi Πρόσθετα (HATs)/Waveshare Cat-1/GNSS HAT - SIM7670G

Waveshare Cat-1/GNSS HAT - SIM7670G, 2 image

Waveshare Cat-1/GNSS HAT - SIM7670G, 3 image

Waveshare Cat-1/GNSS HAT - SIM7670G

Κωδικός:

31-00026861

Part Number: SIM7670G LTE Cat-1/GNSS HAT

ΚατασκευαστήςWaveshare Part NumberSIM7670G LTE Cat-1/GNSS HAT

Διαθέσιμο

Αποστολή σε 24 ώρες

€55⁸⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

The SIM7670G LTE Cat-1/GNSS HAT is an LTE Cat-1 module, supports wireless communication modes including LTE-TDD, LTE-FDD, with up to 10Mbps downlink rate and 5Mbps uplink rate. Supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070/A7670E series, and the AT commands are mostly compatible with SIM800 series. It is suitable for IoT applications like remote information processing, monitoring devices, industrial routers, remote diagnosis, satellite positioning, and so on.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL
Supports RNDIS, NDIS and ECM dial-up
Supports GPS, GLONASS, Galileo, BeiDou positioning
Onboard USB Type-A and Type-C interfaces, for testing AT Commands, network communication, and so on
Extended 3x USB 2.0 Type-A ports for the host devices such as Raspberry Pi, Windows PC
Reserved control pads of the SIM7670G module such as UART and USB pins, make it easy to connect with other host boards
SIM card slot, supports 1.8V/3V SIM card
6x LED indicators, easy to monitor the module operating status and USB connecting status
Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)

Technical data

Frequency band	LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD：B34, B38, B39, B40, B41
Data transmission	≤5Mbps(UL) ≤10Mbps(DL)
GNSS	GPS, GLONASS, Galileo, BeiDou
Power supply	5V
Logic level	3.3V

What's on board

1. SIM7670G module
2. Raspberry Pi 40PIN GPIO header
3. DIP switches for switching to connect the UART and power ON/OFF control of the module to the Raspberry Pi GPIO; switches to BOOT for entering the burning mode
4. USB Type-A interface for connecting to USB port of the host such as Raspberry Pi for 4G communication, power supply, and extending USB ports
5. 3x USB extended ports
6. PWRKEY
7. USB Type-C port for connecting to USB port of the host such as Raspberry Pi for 4G communication, power supply, and extending USB ports
8. GNSS IPEX 1 connector
9. LED indicators
10. LTE IPEX 1 connector
11. Nano SIM card slot
12. 4G UART pads compatible with Raspberry Pi 5 3PIN UART connector
13. Reserved test pads for connecting with other host boards
14. FE1.1S USB 2.0 HUB chip

Waveshare.cloud Support

Provides tutorial and demo for quick start of smart IoT solutions, with large-screen Data Visualization display to meet various application scenarios

Smart garden solutions: The SIM7670G LTE Cat-1/GNSS HAT can report various sensor data of the garden through MQTT to remotely control device ON/OFF, irrigation, fertilization, and so on.
Server Performance Cloud Monitoring: The SIM7670G LTE Cat-1/GNSS HAT can report various performance parameters of the Raspberry Pi server through MQTT, and monitor the operation status in real-time through the cloud platform.
IoT GPS Mobile Positioning: The SIM7670G LTE Cat-1/GNSS HAT can regularly report the data of the GPS positioning module through MQTT to realize mobile detection, animal or device positioning and tracking, etc.

Included in the package

1. 1× SIM7670G Cat-1/GNSS HAT
2. 1× USB-A to USB-C cable
3. 1× GPS Antenna
4. 1× LTE Antenna
5. 2×20PIN female pinheader
6. 1× USB 3.0 Adapter
7. 1× USB 2.0 Adapter
8. 1× Screws pack