Waveshare GSM/GPRS HAT - R800C

31-00023459
R800C GSM/GPRS HAT
CompanyWaveshare Part NumberR800C GSM/GPRS HAT
In Stock
Ships in 24 Hours
2480
Our quantity discounts:
Quantity
10+
Price
22.32
Gropbotronics Store Availability
Availability in Retail Store
Payments & Shipping

The R800C GSM/GPRS HAT is a handy, low power Raspberry Pi HAT which features multi-communication functionalities: GSM, GPRS, and phone call, applicable to countries or regions with 2G network coverage, up to 85.6kbps GPRS speed. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, and so on.

Features
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
  • Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
  • UART interface, for connecting controller boards like Arduino/STM32
  • Onboard voltage translator, 3.3V by default, switch to 5V via jumper
  • 2x LED indicators, easy to monitor the working status
  • SIM card slot, supports 1.8V/3V SIM card
  • Baudrate: 2400bps ~ 115200bps (115200bps by default)
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)



Technical data
GSM / GPRS / Audio
Frequency bandGSM: 850/900/1800/1900 MHz
Quad-band auto search
Compliant to GSM phase 2/2+
Emitting powerClass 4 (2W @ 900 MHz)
Class 1 (1W @ 1800 MHz)
GPRS connectivityGPRS multi-slot class 12/10 (default)
GPRS multi-slot class 1~12 (configurable)
GPRS data featureUL/DL speed: ≤85.6kbps
Supports Packet Broadcast Control Channel (PBCCH)
Coding schemes: CS-1, CS-2, CS-3, CS-4
Supports PAP (Password Authentication Protocol) for PPP connection
Supports Unstructured Supplementary Service Data (USSD)
SMSSupports: MT, MO, CB, Text, PDU
SMS storage: SIM card
AudioVoice encode/decode mode: Half Rate, Full Rate, Enhanced Full Rate, Adaptive Multi Rate
Supports echo cancellation
Supports noise reduction
Others
Power supply5V
Logic level5V / 3.3V (default)
Operating temperature-40°C ~ 85°C
Storage temperature-45°C ~ 90°C
Dimensions30.2mm x 65mm
What's on board
  1. R800C module
  2. RT9193-33 power chip
  3. MIC29302 power chip
  4. TXS0108EPWR voltage translator, translates 3.3V/5V into 1.8V
  5. Raspberry Pi GPIO Header for connecting with Raspberry Pi
  6. Operating voltage selection jumper
    VCC-3.3V: set operating voltage as 3.3V
    VCC-5V: set operating voltage as 5V
  7. PWR selection jumper, PWR-P4: startup/shutdown by the Raspberry Pi P4 pin
  8. 3.5mm earphone/mic jack
  9. R800C control header for easily connecting with host boards like STM32
  10. GSM Antenna Connector
  11. SIM Card slot
  12. R800C power on/off
    Press for 1s to start up the R800C
    Press for 1s to shutdown the R800C after booting
  13. NET Indicator
    Fast flashing when module starts, flashing slowly after GSM register succeed
  14. Power Indicator


Comparison table
ModelWaveshare GSM/GPRS/GNSS/Bluetooth HAT - SIM868Waveshare GSM/GPRS/Bluetooth HAT - SIM800CWaveshare GSM/GPRS HAT - R800C
GRobotronics SKU31-0001346031-0001615731-00023459
Frequency band
GSMGSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+GSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+GSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+
GNSSGPS, GLONASS, BeiDou--
BluetoothIntegrates AT commands Compliant to Bluetooth specification3.0 + EDR Support functions such as SPP, OPP, HFP/HSPIntegrates AT commands Compliant to Bluetooth specification3.0 + EDR Support functions such as SPP, OPP, HFP/HSP-
Data transmission
GPRS (Kbps)85.6(DL)/85.6(UL)85.6(DL)/85.6(UL)85.6(DL)/85.6(UL)
Others
Network protocolTCP/UDP/HTTP/HTTPS/SSL/TLS/FTP, etc.TCP/UDP/HTTP/HTTPS/SSL/TLS/FTP, etc.TCP/UDP/HTTP/HTTPS/SSL/TLS/FTP, etc.
Internet accessPPPPPPPPP
SIM card slot1.8V/3V1.8V/3V1.8V/3V
UARTSupport UART to send and receive AT commandsSupport UART to send and receive AT commandsSupport UART to send and receive AT commands
USB portfor testing AT commands, getting GPS positioning data, firmware upgrade, etc.for powering and catching log-
AudioOnboard audio jack for phone calls-Onboard audio jack for phone calls
Antenna connectorGSM antenna + Bluetooth antenna + GNSS antennaGSM antenna + Bluetooth antennaGSM antenna
Power supply5V (USB port or pinheader)5V (USB port or pinheader)5V (USB port or pinheader)
Logic level5V/3.3V (default)5V/3.3V (default)5V/3.3V (default)
Operating temperature-40 ~ 85°C-40 ~ 85°C-40 ~ 85°C
Storage temperature-45°C ~ 90°C-45°C ~ 90°C-45°C ~ 90°C
Dimensions30.4 × 65.0mm30.4 × 65.0mm30.5 × 65.0mm
Applications
Applicable regionsApplicable to countries or regions with 2G network coverage
ExamplesEnvironmental monitoring, Smart payment, Smart home, Smart city, Intelligent agriculture and animal husbandry, etc.
Package contents
  1. R800C GSM/GPRS HAT ×1
  2. GSM Antenna ×1
  3. RPi screws pack (2pcs) ×1

Company
Waveshare
Part Number
R800C GSM/GPRS HAT
Connection
  • UART (Serial TTL)
Warranty
12 Month Manufacturer Warranty
G. Weight
0.023kg
HAT Type
  • Wireless Communication
Συμβατότητα HAT
  • Raspberry Pi 4
  • Raspberry Pi 5
  • Raspberry Pi Zero
Find similar
  • We suggest also