Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
PCIe TO 4G/5G M.2 USB3.2 HAT+ is a PCIe to USB3.2/M.2 adapter board designed for Raspberry Pi 5. It is compatible with 5G modules in 3042/3052 size, supports Gen2 mode and high-speed communication.
Features
- HAT+ standard design with onboard I2C EEPROM.
- Supports Raspberry Pi 40PIN GPIO stackable expansion.
- Supports PCI-E×1 Gen2 mode.
- Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals.
- Onboard M.2 (NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages.
- Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input.
- Onboard power monitoring chip for real-time measurement of voltage, current and power.
- Onboard SIM card slot for NANO-SIM card.
- Onboard Reset button, Power and Network indicators for easy debugging and monitoring operating status.
- Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation.
- Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation.
- Application Scenarios: industrial routers, home gateways, set top boxes, industrial laptops, consumer laptops, industrial PDAs, rugged industrial PCs, and more.
What's on board
- VL805: PCIe to USB 3.2 Gen1 HUB chip
- EEPROM for saving HAT ID and product information
- INA219: Power monitoring chip
- 16PIN PCIe interface for connecting to the PCIe interface of Raspberry Pi 5
- M.2(NGFF) Key B slot, compatible with 3042/3052 packages M.2 4G/5G modules
- Raspberry Pi GPIO header for connecting Raspberry Pi 5
- USB 3.2 Gen1 expanded ports, USB1~USB3
- Nano SIM card slot for installing Nano-SIM card
- Type-C interface for 4G/5G networking of Raspberry Pi or PC via USB cable, firmware updating, or external power supply input
- DIP switch for switching to use GPIO pins to control power on/off and reset of the module
- Reset button, press it to reset the module
- PWR, power indicator
- NET, module network status indicator
Package contents
- PCIe to 4G/5G M.2 USB3.2 HAT+ ×1
- 5G-4IN1-PCB Antenna ×1
- 16P-Cable-40mm cable ×1
- IPEX1 to IPEX4 cable ~13cm 4PCS ×1
- Screws pack ×1
