>>> Θέσεις εργασίας <<<

 
+302118004320
Greek (GR)
0Στο Καλαθι

Waveshare PCIe to M.2 Adapter & Gigabit Ethernet HAT+

31-00028515
PCIe TO ETH M.2 HAT+
ΚατασκευαστήςWaveshare Part NumberPCIe TO ETH M.2 HAT+
Διαθέσιμο
Αποστολή σε 24 ώρες
€2740
Waveshare
Ποσοτικές εκπτώσεις:
Ποσότητα
10+
Τιμή
€24.66
+ −
Αγαπημένα
Κάνε μια ερώτηση
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

This HAT+ board is specifically designed for the Raspberry Pi 5, offering a driver-free, plug-and-play experience. It expands the capabilities of the Raspberry Pi 5 by adding a Gigabit Ethernet port and supporting M.2 hard drives of various sizes. It is compatible with NVMe protocol M.2 interface drives, providing faster read and write speeds compared to the TF card slot, resulting in higher work efficiency. Additionally, it supports booting the Raspberry Pi 5 from an NVMe SSD.

Features
  • Supports NVMe protocol M.2 interface hard drives
  • Only supports PCI-E x1 Gen2 mode
  • Based on the 16-pin PCIe interface of the Raspberry Pi 5, only supports Pi 5
  • Compatible with M.2 hard drives in 2230, 2242, 2260, and 2280 sizes
  • Equipped with the high-performance RTL8111H Gigabit Ethernet chip
  • Features a sink design for the network port
  • Utilizes an immersion gold process for improved appearance, anti-oxidation, anti-corrosion, and stronger soldering
  • Onboard operational indicator lights for easy status monitoring
    • PWR: Continuously lit when powered on
    • ACT: Blinks during read and write operations
  • Network port indicator
    • Green light blinks for Gigabit network port
    • Yellow light blinks for 100 Mbps network port

Note: Since Raspberry Pi does not natively support NVMe booting, the config.txt file be modified (see the wiki page).

What is HAT+?

Based on the original HAT standard, HAT+ is a new standard introduced by Raspberry Pi.

  • Compatible with the Raspberry Pi 40-pin GPIO, plug-and-play
  • Integrates an EEPROM chip for automatic board configuration loading, simplifying the development process
  • Features standardized dimensions for a perfect fit with Raspberry Pi
  • Supports power supply through the Raspberry Pi 40-pin GPIO










Package contents
  1. PCIe TO ETH M.2 HAT+ ×1
  2. 2×20 Pin header ×1
  3. 16P-Cable-40mm ×1
  4. Screws pack ×1
  5. SSD mounting screw ×1

Κατασκευαστής
Waveshare
Part Number
PCIe TO ETH M.2 HAT+
Καθ. Βάρος
0.23kg
Συμβατότητα
  • Raspberry Pi 5
Τύπος HAT
  • Ethernet
  • Memory
Βρες Παρόμοια
  • Προτείνουμε επίσης