Gravity Steam Sensor

25-00016940
SEN0121
Διαθέσιμο
Αποστολή σε 24 ώρες
240
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά
This is a steam (water) sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.
 

APPLICATIONS

  • Simple rain detector
  • Cheap steam level switch
  • Touch sensor based on humidity
 

Notice:

  • The connector is not waterproof, please be careful not to put the connector directly in water
  • The new version of analog sensor port pin mapping has been changed as the following two features

Specifications

  • Power supply: 3.3v or 5v
  • Output voltage signal: 0~4.5v(@5v) or 0~3.0v(@3.3v)
  • Size: 30x20x6mm (0.18x0.79x0.24")

Pin definition:

  • Analog output(Blue wire)
  • GND(Black wire)
  • Power(Red wire)

Κατασκευαστής
DFROBOT
Μικτό Βάρος
0.001kg
Τύπος Αισθητήρα
  • Υγρασίας
Βρες Παρόμοια
  • Προτείνουμε επίσης