FREE SHIPPING for orders over 85.00

Relay Module - 4 Channel 12V

by OEM
This 4 Channel Relay Module (with light coupling) 12V module meet the safety standard as control areas and load area have the isolation groove. Optical...
19-00010779
Gross Weight: 0.06kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: OEM
Made in: China
In Stock
Ships in 24 Hours
Available in store
5.90
Without VAT 4.76
+
Our quantity discounts:
Quantity 10+
Price 4.72
WISHLIST COMPARE

DESCRIPTION

This 4 Channel Relay Module (with light coupling) 12V module meet the safety standard as control areas and load area have the isolation groove. Optical coupling isolation module.

The triggering of 4 Channel Relay Module is reliable, more stable. The double FR–4 circuit board design, high-end SMT process. It has power and relay operation instructions. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy.

The inputs of 4 Channel 12V Relay Module are isolated to protect any delicate control circuitry.

A wide range of microcontrollers such as Arduino, AVR, PICARM and so on can control it.

The use of such high-voltage relay eliminates the risk of heating up of the relay as electromechanical relay limit the current consumption in accordance with a voltage rating.

 

NOTES

  • Working voltage 12V --> Requires an external power supply to opperate the relays.
  • Includes optocouplers so that your Arduino or Raspberry Pi does not get damaged by reverse voltages.

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
OEM
Gross Weight:
0.055kg
Made in:
China
Rated Coil Voltage:
12VDC
Contact Current Max. :
10A
Type / Contacts Config.:
  • SPDT
  • Module

EXTRA SPECS

  • Operating Voltage: 12V DC
  • Equipped with high-current relay: 10A@250VAC / 10A@30VDC
  • It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
  • High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
  • A freewheeling diode to protect your microcontroller
  • Input Signal Pin connected to Burg stick for easy accessibility
  • LED Status indicators to indicate the relay ON/OFF status
  • Mounting holes provided

Module interface:

  • The positive (according to the relay voltage VCC: connect power supply)
  • GND: connect power negative
  • IN1: relay module (effective) low-level trigger signal trigger end
  • IN2: relay module (effective) low-level trigger signal trigger end
  • IN3: relay module (effective) low-level trigger signal trigger end
  • IN4: relay module (effective) low-level trigger signal trigger end