>>> Θέσεις εργασίας <<<

 
+302118004320
English (GB)
0Cart

Movement

Latest Additions

SparkFun Tri-Axis Gyro Breakout - L3G4200D
03-00010612
This is a breakout board for the L3G4200D low-power three-axis angular rate sensor.
Sensor TypeGyroscope Typical Input Voltage3.3VDC Oparating Current6.1mA
€3410 €6820 You save: €34.10
In Stock
+ −
SparkFun RedBot Sensor - Accelerometer
03-00012589
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection.
Sensor TypeAccelerometer Typical Input Voltage5VDC Oparating Current165uA
€1000
In Stock
+ −
SparkFun 9DoF Sensor Stick
03-00013944
The SparkFun 9DoF Sensor Stick is an easy-to-use 9 Degrees of Freedom IMU. The Sensor Stick deftly utilizes the LSM9DS1 motion-sensing system-in-a-chip, the same IC used in the SparkFun 9DoF IMU Breakout . It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer – nine...
Sensor TypeIMU Typical Input Voltage3.3VDC Oparating Current4mA
€2250
Out of Stock
Waveshare 10 DOF IMU Sensor
31-00012476
10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own copter or balancing robot, provides great man-machine interaction.
Sensor TypeIMU, Barometric pressure, Temperature , Gyroscope, Magnetometer, Compass, Accelerometer Typical Input Voltage3.3VDC, 5VDC Oparating Current3.2mA
€3493 €4990 You save: €14.97
In Stock
+ −
Triple Axis Gyroscope & Accelerometer IMU - MPU6050
19-00010173
The MPU-6050 sensor module contains an accelerometer and a gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel. Therefore it captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the...
Sensor TypeIMU Typical Input Voltage3.3VDC, 5VDC Oparating Current3.9mA
€360
In Stock
+ −
Triple Axis Gyroscope & Accelerometer IMU - MPU6050 (Soldered Header)
19-00012882
The MPU-6050 sensor module contains an accelerometer and a gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel. Therefore it captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the...
Sensor TypeIMU Typical Input Voltage3.3VDC, 5VDC Oparating Current3.9mA
€360
In Stock
+ −
Сategories
Product filters
Sensor Type
Communication Protocol
Interface
Typical Input Voltage
Manufacturer
Bestsellers