This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it.

The ATmega128RFA1 is a portmanteau of sorts – two separate components combined to form one device; half microcontroller, half RF transciever. 

The Copernicus II is a great GPS module from Trimble, but the SMD module prohibits immediate gratification.

The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface.

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers.

Αυτή είναι μια βασική οθόνη LCD 16 χαρακτήρων επι 2 γραμμές με κομψό μαύρο φόντο και λευκούς χαρακτήρες.

This parts kit allows you to modify a coolant hose into an additional hand for your SparkFun Third Hand.

This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automatic direction sensing. 

Πρόκειται για ένα 5V Arduino που ο bootloader τρέχει στα 16MHz σε μία εξαιρετικά κομψή πλακέτα που θα χωρέσει εύκολα στο επόμενο μικρό σας project.

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. 

This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project.

If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time.

XBee Explorer regulated φροντίζει για τη ρύθμιση 3.3V, signal conditioning, και των βασικών δεικτών δραστηριότητας (Power, RSSI και DIN / DOUT, δραστηριότητα LED). Μετατρέπει τα σειριακά σήματα των 5V σε 3.3V έτσι ώστε να μπορείτε να συνδέσετε ένα σύστημα 5V (μέχρι και 3.3V) σε οποιαδήποτε μονάδα XBee

The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor.

Here is a breakout board for the LS20126 GPS receiver.