grobotronics
2118004320

CATALOG

Motor Drivers

Φίλτρα
Φίλτρα

Servo / Motors

FILTERS

Driver Type
Max. Current / Channel

A  –  A

  • ‎0.25A
  • ‎20A
Manufacturer
Availability

A motor driver is a little current amplifier; the function of motor drivers is to take a low-current control signal and then turn it into a higher-current signal that can drive a motor. There are many different kinds of motor drivers. Has a full programmable motor driver selection from several chip manufacturers that can be used for a motor driver IC (integrated circuit), bipolar stepper motor driver, H bridge motor driver, servo motor driver, DC motor driver, brushless motor driver or for any circuit that may require a motor driver.

Page 1 / 3 - 50 Products
Dual Motor Driver Module L298N
Dual Motor Driver Module L298N
€4.20
Motor Drivers, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.025kg, China, Stepper, DC Motor, Max. Current per Channel: 2A
The L298N H-bridge Module, allows you to control the speed and direction of two DC motors, or control one bipolar stepper motor with ease. The L298N...
In Stock
Ships in 24 Hours
+ −
A4988 Stepper Motor Driver
A4988 Stepper Motor Driver
€3.20
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, BIQU, 0.004kg, China, Stepper, Max. Current per Channel: 2A
This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection.
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

No products with the selected options in stock
DRV8825 Stepper Motor Driver
DRV8825 Stepper Motor Driver
€3.80
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, BIQU, DRV8825, 0.004kg, China, Stepper, Max. Current per Channel: 2.2A
This product is a breakout board for TI’s DRV8825 stepper motor driver.  This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil.
In Stock
Ships in 24 Hours
+ −
L293D H-Bridge 1A
L293D H-Bridge 1A
€6.60
DC Motor, Max. Current per Channel: 1.2A, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, STMicroelectronics, L293D, 0.001kg, China, Το προϊόν είναι εξάρτημα και δεν αποτελεί έτοιμη συσκευή.

The L293D is a monolithic integrated, high voltage, high current, 4-channel driver.

In Stock
Ships in 24 Hours
+ −
DC Motor PWM Speed Controller 6-28V 3A
DC Motor PWM Speed Controller 6-28V 3A
€3.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.024kg, China, DC Motor, Max. Current per Channel: 3A
This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse– Width-Modulated (PWM) DC voltage with a Duty Cycle fully...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

No products with the selected options in stock
Stepper Driver Breakout - ULN2003
Stepper Driver Breakout - ULN2003
€1.20
Motor Drivers, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.003kg, China, Stepper, Max. Current per Channel: 0.50A
ULN2003 Stepper Motor Driver Board is to use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper.
In Stock
Ships in 24 Hours
+ −
DC Motor PWM Speed Controller 10-60V 20A
DC Motor PWM Speed Controller 10-60V 20A
€7.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.08kg, China, DC Motor, Max. Current per Channel: 20A
Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current...
In Stock
Ships in 24 Hours
+ −
SN754410 H-Bridge 1A
SN754410 H-Bridge 1A
€3.60
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, Texas Instruments, SN754410NE, 0.001kg, Taiwan, DC Motor, Max. Current per Channel: 1A

Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! Please see datasheet for more information.

In Stock
Ships in 24 Hours
+ −
TB6560 Stepper Motor Driver (Single Axis)
TB6560 Stepper Motor Driver (Single Axis)
€9.90
Motor Drivers, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.074kg, China, Stepper, Max. Current per Channel: 3.5A
In Stock
Ships in 24 Hours
+ −
Dual Motor Driver Module L9110S
Dual Motor Driver Module L9110S
€2.50
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.006kg, China, Stepper, DC Motor, Max. Current per Channel: 0.80A
The L9110S 2-Channel motor driver module is a compact board that can be used to drive small robots. This module has two independent motor driver chips which...
In Stock
Ships in 24 Hours
+ −
Stepper Motor Driver TB6600
Stepper Motor Driver TB6600
€12.80
Motor Drivers, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.1kg, China, Stepper, Max. Current per Channel: 4.5A
TB6600 stepper motor Driver Controller 4.5A 8 - 50V TTL 16 Micro-Step CNC Single-Axis Based on the TB6600HG chip, the new BL-TB6600-V1.2 driver model...
In Stock
Ships in 24 Hours
+ −
DC Motor PWM Speed Controller 9-60V 10A with Direction Control
DC Motor PWM Speed Controller 9-60V 10A with Direction Control
€8.00
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.001kg, China, DC Motor, Max. Current per Channel: 10A
Speed controller is made with high quality circuit board which ensures a longer service life. Suitable for the DC motor (or DC load) within 10A....
In Stock
Ships in 24 Hours
+ −
DC Motor PWM Speed Controller 9-50V 10A
DC Motor PWM Speed Controller 9-50V 10A
€5.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.001kg, China, DC Motor, Max. Current per Channel: 10A
Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current...
In Stock
Ships in 24 Hours
+ −
DC Motor Driver Breakout with L298
DC Motor Driver Breakout with L298
€5.90
Motor Drivers, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.028kg, China, DC Motor, Max. Current per Channel: 2A
In Stock
Ships in 24 Hours
+ −
DC Motor PWM Speed Controller 9-60V 20A
DC Motor PWM Speed Controller 9-60V 20A
€9.90
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.133kg, China, DC Motor, Max. Current per Channel: 20A
Speed controller is made with high quality circuit board which ensures a longer service life. Suitable for the DC motor (or DC load) within 20A....
In Stock
Ships in 24 Hours
+ −
Stepper Motor Driver TB67S109A - Encased
Stepper Motor Driver TB67S109A - Encased
€12.80
Motor Drivers, Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.001kg, China, Stepper, Max. Current per Channel: 4A
The TB67S109A stepper drive is an upgraded version of the TB6600, with higher segments up to 32, suitable for high-resolution applications. This update to...
In Stock
Ships in 24 Hours
+ −
16-Channel 12-bit PWM/Servo Driver - PCA9685
16-Channel 12-bit PWM/Servo Driver - PCA9685
€6.80
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, OEM, 0.012kg, China, Servo, Max. Current per Channel: 0.25A
This module is a breakout board for the NXP PCA9685 16 channel PWM controller. It features 16 fully programmable PWM outputs with a 12bit resolution giving...
In Stock
Ships in 24 Hours
+ −
Stepper Motor Driver TMC2208 V3.0
Stepper Motor Driver TMC2208 V3.0
€6.80
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή, BIQU, 0.012kg, China, Stepper, Max. Current per Channel: 2A
TMC2208 V3.0 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision with...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected].

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

No products with the selected options in stock
1 2 3