Motor Drivers

Φίλτρα
Φίλτρα

FILTERS

Driver Type
Max. Current / Channel

A  –  A

  • 0.25A
  • 30A
Manufacturer
Availability

A motor driver is a little current amplifier; the function of motor drivers is to take a low-current control signal and then turn it into a higher-current signal that can drive a motor. There are many different kinds of motor drivers. Has a full programmable motor driver selection from several chip manufacturers that can be used for a motor driver IC (integrated circuit), bipolar stepper motor driver, H bridge motor driver, servo motor driver, DC motor driver, brushless motor driver or for any circuit that may require a motor driver.

3.20
Stepper, Max. Current per Channel: 2A, OEM, China
This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection.
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to dpo@grobotronics.com.

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

Out of Stock
Add to Cart

3.80
Stepper, Max. Current per Channel: 2.2A, China
This product is a breakout board for TI’s DRV8825 stepper motor driver.  This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil.
In Stock
Ships in 24 Hours
+

13.50
DC Motor, Max. Current per Channel: 2A, Microbot, Italy
The Dual DC Motor Driver 4A V3 allows to indipendently drive two DC motors, controlling both velocity and direction. The minimum supply voltage allowed is...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to dpo@grobotronics.com.

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

Out of Stock
Add to Cart

122.90
DC Motor, Max. Current per Channel: 30A, Basicmicro, China
The Roboclaw 2x15A motor controller by Ion Motion Control can supply two brushed DC Motors  with 15 Amps continuous and up to 30 Amps peak. With its multi...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to dpo@grobotronics.com.

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

Out of Stock
Add to Cart

7.90
DC Motor, Max. Current per Channel: 20A, OEM, China
Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current...
Out of Stock
Product out of stock
Options
Out of Stock
Add to Cart

9.90
Stepper, Max. Current per Channel: 2A, BIQU, China
TMC2208 V3.0 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision with...
In Stock
Ships in 24 Hours
+

5.80
Servo, Max. Current per Channel: 0.25A, OEM, AA217, China
This module is a breakout board for the NXP PCA9685 16 channel PWM controller. It features 16 fully programmable PWM outputs with a 12bit resolution giving...
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to dpo@grobotronics.com.

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

Out of Stock
Add to Cart

9.90
DC Motor, Max. Current per Channel: 20A, OEM, China
Speed controller is made with high quality circuit board which ensures a longer service life. Suitable for the DC motor (or DC load) within 20A....
Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to dpo@grobotronics.com.

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

Out of Stock
Add to Cart

8.00
DC Motor, Max. Current per Channel: 10A, OEM, HS2068, China
Speed controller is made with high quality circuit board which ensures a longer service life. Suitable for the DC motor (or DC load) within 10A....
In Stock
Ships in 24 Hours
+

9.90
Stepper, OEM, HS0634, China
This is a pulse generation module, it supplies the control signal to the controller step by step. To control the stepper motor, it must be equipped with a...
In Stock
Ships in 24 Hours
+

5.90
DC Motor, Max. Current per Channel: 10A, OEM, China
Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current...
Out of Stock
Product out of stock
Options
Out of Stock
Add to Cart

39.90
Stepper, Max. Current per Channel: 2.5A, BIQU, China
TMC2130-V3.0 is a new module that is optimized and upgraded to solve the problem that older drivers cannot choose to use the SPI working mode. The SPI...
In Stock
Ships in 24 Hours
+

8.60
Stepper, Max. Current per Channel: 2A, OEM, China
TMC2209 have all function of TMC2208, can completely replace tmc2208. At the same time, TMC2209 have better heat dissipation, support bigger current,...
In Stock
Ships in 24 Hours
+

6.80
Stepper, Max. Current per Channel: 2A, OEM, China
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision....
In Stock
Ships in 24 Hours
+

3.60
DC Motor, Max. Current per Channel: 1A, Texas Instruments, Taiwan

Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! Please see datasheet for more information.

In Stock
Ships in 24 Hours
+

4.90
DC Motor, Max. Current per Channel: 1.2A, China, Breadboard Friendly, Το προϊόν είναι εξάρτημα και δεν αποτελεί έτοιμη συσκευή.

The L293D is a monolithic integrated, high voltage, high current, 4-channel driver.

Out of Stock
Product out of stock
Options

We (GRobotronics) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to dpo@grobotronics.com.

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

Out of Stock
Add to Cart

3.00
DC Motor, Stepper, Max. Current per Channel: 2A

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to  accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.

In Stock
Ships in 24 Hours
+

5.20
Stepper, Max. Current per Channel: 2A, STMicroelectronics, China
Upon order
Delivery on 1 - 3 Days
+
1 2 3