>>> Θέσεις εργασίας <<<

 
+302118004320
English (GB)
0Cart

Environment

Latest Additions

SparkFun Infrared Temperature Breakout - TMP006
03-00011859
This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it.
Sensor TypeTemperature CompanySparkFun Electronics Part NumberSEN-11859
€1020 €2040 You save: €10.20
In Stock
+ −
Particulate Matter Sensor SPS30
05-00011594
With this new particulate matter sensor, Sensirion expands its range of environmental sensing solutions and opens up a new dimension in indoor and outdoor air quality applications. The Sensirion Particulate Matter Sensor SPS30 is a compact, high quality, optical particle sensor that uses...
Sensor TypeDust Typical Input Voltage3.3VDC, 5VDC Oparating Current60mA
€4490
In Stock
+ −
CO2 Humidity & Temperature Sensor SCD30
05-00011105
SCD30 - Sensor Module for HVAC and Indoor Air Quality Applications CMOSens® Technology for IR detection enables highly accurate carbon dioxide measurement at a competitive price. Along with the NDIR measurement technology for CO2 detection, a best-in-class Sensirion humidity and temperature...
Sensor TypeTemperature , Gas , Humidity Typical Input Voltage3.3VDC, 5VDC Oparating Current75mA
€6490
In Stock
+ −
Grove CO2 & Temperature & Humidity Sensor (SCD30) - 3-in-1
32-00018332
The Grove - SCD30 is a 3-in-1 Arduino sensor that can measure CO2, temperature, and humidity. Based on Sensirion SCD30, it is a Non-Dispersive Infrared(NDIR) carbon dioxide sensor with high precision and wide measurement accuracy which can reach ±(30 ppm + 3%) between 400ppm to 10'000ppm. It...
Sensor TypeTemperature , Gas , Humidity Typical Input Voltage3.3VDC, 5VDC Oparating Current75mA
€7990
Out of Stock
Digital Humidity Sensor SHT85 (RH/T)
05-00010652
Pin-type Humidity Sensor Enabling Easy Replaceability A highly accurate, digital pin-type relative humidity sensor for easy replaceability in a wide range of applications. The digital humidity sensor SHT85 is Sensirion’s best-in-class humidity sensor with a pin-type connector for easy...
Sensor TypeTemperature , Humidity Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
€2790
In Stock
+ −
Gravity Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
25-00016108
This is a multifunction air quality monitor that can be detected not only the concentration of particles and formaldehyde but also the value of temperature and humidity. As the particle concentration sensor it can be used to obtain the number of suspended particles in the air by laser. It also...
Sensor TypeTemperature , Gas , Humidity, Dust Typical Input Voltage5VDC Oparating Current100mA
€7990
In Stock
+ −
Gravity Environmental Sensor I2C - BME280
25-00016118
BME280 is an environmental sensor that integrates onboard temperature sensor, humidity sensor and barometer. The sensor is of high precision, multiple functions, and small size etc. It provides both SPI and I2C interfaces, which make it easy to make a fast prototypes. It can be widely used in...
Sensor TypeBarometric pressure, Humidity, Temperature Typical Input Voltage3.3VDC, 5VDC Oparating Current2mA
€1990
In Stock
+ −
Gravity Analog Temperature & Humidity Sensor - SHT30
25-00016122
Gravity: Analog SHT30 Temperature & Humidity  Sensor  adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap temperature sensing components, the...
Sensor TypeTemperature , Humidity Typical Input Voltage3.3VDC, 5VDC Oparating Current0.5mA
€860
In Stock
+ −
Gravity IR Temperature Sensor - MLX90614-DCC
25-00016116
We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the sensor reach thermal equilibrium. This can mean longer response times and reading inaccuracies offset by ambient...
Sensor TypeTemperature , Infrared Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
€2280
In Stock
+ −
Gravity Air Quality Sensor Laser PM2.5
25-00016107
M2.5 laser dust sensor is a digital universal particle concentration sensor，it can be used to obtain the number of suspended particulate matter in a unit volume of air within 0.3 to 10 microns, namely the concentration of particulate matter, and output with digital interface, also can output...
Sensor TypeGas , Dust Typical Input Voltage5VDC Oparating Current120mA
€6390
In Stock
+ −
DFRobot Temperature & Humidity Sensor - RS485
25-00016601
This is a high-precision industrial-grade RS485 temperature and humidity sensor. It uses high-quality digital integrated transducer and reliable digital processing circuit to convert the temperature and humidity in the environment into corresponding RS485 signals. And it can reliably carry out...
Κατηγορία ΑισθητήραΠεριβάλλοντος Sensor TypeHumidity, Temperature Typical Input Voltage12-36VDC
€3990
In Stock
+ −
Gravity Waterproof DS18B20 Sensor Kit
25-00016103
This waterproof temperature sensor kit use  DS18B20  probe AS . It contains a probe with a  resistor module . So it is easy to connect on the  Arduino board .  The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that...
Sensor TypeTemperature Typical Input Voltage3.3VDC, 5VDC InterfaceDigital
€1000
In Stock
+ −
Barometric Pressure Sensor I2C - BME180
39-00013307
Measuring the absolute pressure of the enviroment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable...
Sensor TypeBarometric pressure Typical Input Voltage3.3VDC InterfaceDigital
€360
In Stock
+ −
Temperature & Humidity Sensor - DHT11 ESP-01/01S
39-00010600
This module is mainly controlled by ESP8266-01/ESP-01S, and DHT11 is a temperature and humidity sensor. The temperature and humidity in the ESP8266 acquisition environment are uploaded to the server. Support 3.7v-12V DC power supply (3.7V lithium battery). Can be used as a temperature and...
Sensor TypeTemperature , Humidity Typical Input Voltage5VDC CompanyOEM
€420
In Stock
+ −
Gravity Analog Temperature Sensor - LM35
25-00016602
This is an  Arduino Temperature Sensor  based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature. The LM35 chip is produced by National Semiconductor Corporation and offers a functional range between 0 degree Celsius to 100 degree...
Sensor TypeTemperature Typical Input Voltage3.3VDC, 5VDC InterfaceAnalog
€1190
In Stock
+ −
Anemometer Kit 0-5V (IP65 grade)
25-00016608
Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium alloy, the anemomter is of high strength, weather resistance...
Sensor TypeWeather Typical Input Voltage12-24VDC InterfaceAnalog
€6990
In Stock
+ −
Wind Speed Transmitter - RS485
25-00016620
This wind speed sensor is a professional meteorological instrument used to measure horizontal wind speed within 0~32.4m/s. It integrates a hall sensor inside. The shell and wind cups are made of aluminum alloy material and use special mold precision die casting process, featuring small dimension...
Κατηγορία ΑισθητήραΠεριβάλλοντος Sensor TypeWeather Typical Input Voltage7-24VDC
€5990
In Stock
+ −
Wind Direction Transmitter - RS485
25-00016621
The wind direction sensor is a professional meteorological instrument used to measure horizontal wind direction. It integrates a hall sensor inside. The shell and weather vane is made of aluminum alloy material and uses special mold precision die casting process, featuring small dimension...
Κατηγορία ΑισθητήραΠεριβάλλοντος Sensor TypeWeather Typical Input Voltage7-24VDC
€5990
In Stock
+ −
Fermion Multifunctional Environmental Sensor
25-00016631
This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 UV sensor into one and offers 5 kinds of environmental parameters. Professional sensor chips are selected for each kind of...
Sensor TypeTemperature , UltraViolet, Barometric pressure, Luminosity, Humidity Typical Input Voltage3.3VDC Oparating Current35mA
€3200
In Stock
+ −
Fermion Pressure Sensor - ICP-10111
25-00016633
This barometric pressure temperature sensor is equipped with TDK's newly launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-leading relative accuracy, and temperature offset coefficient. The Fermion:...
Sensor TypeBarometric pressure Typical Input Voltage3.3VDC, 5VDC Oparating Current2mA
€980
In Stock
+ −
Сategories
Product filters
Sensor Type
Communication Protocol
Interface
Typical Input Voltage
Manufacturer
    Show all (19)
Bestsellers